Alternatives & variations Download PDF datasheet

RL24P2

German transmitting pentode with published limiting ratings and operating data. Its manufacturer documentation identifies professional radio-frequency power service rather than receiver small-signal operation.

Directly heatedCold cathodeCommon cathodeDissimilar

Sections: 1
Base: -
Socket code: -
Base pins: -
Nominal heater: 2.4 V / 165 mA

Description

RL24P2: German transmitting pentode with published limiting ratings and operating data. The complete German-language datasheet was interpreted by technical meaning, including ratings, characteristics and operating conditions.

General specifications

Tube and section characteristics

Properties common to every published source and operating point.

Heater and base

Base: -
Socket code: -
Base pins: -
Nominal heater voltage: 2.4 V
Nominal heater current: 165 mA
Parallel heater voltage: -
Parallel heater current: -
Series capable: No

Terminal pinout

Electrical assignments shared by every tube using this base designation.

No verified pinout is recorded for this base designation.

Section ratings

1 physical section, each with unique specifications.

Section 1

Pentode

X-ray radiationInterelectrode capacitances

Plate resistance: 270000 Ω
Transconductance: 0.0022 S
Max plate voltage: 200 V
Max screen voltage: 130 V

Published ratings and characteristic constants promoted where reliably identified; other useful data retained as parameters.

Source-dependent data

Operating conditions by source

Each block preserves the test conditions and published values from one reference. Values from different sources are intentionally kept separate.

Data set 01

194X Wehrmacht Rohren

Published operating points and test conditions from this source.

SECTION 1

Pentode

Characteristics

Heater current
165 mA
Plate resistance
270000 ohm
Transconductance
2200 uS

Other

Maximum anode voltage
200 V
Maximum screen voltage
130 V
Maximum screen dissipation
5 W