Data set 01
1959 Telefunken
Published operating points and test conditions from this source.
SECTION 1
Triode
Characteristic
HeaterOrFilamentVoltage
1.5 V
HeaterOrFilamentCurrent
250 mA
PlateVoltageMinimum
50 V
Plate Voltage Maximum
100 V
Voltage - Triode (single) ·Triode
RE84
Early oxide-filament universal receiver triode for detector, RF, and audio-frequency service.
Directly heatedCold cathodeCommon cathodeDissimilar
- Sections
- 1
- Base
- -
- Socket code
- -
- Base pins
- -
- Nominal heater
- 1.5 V / 250 mA
Description
Early oxide-filament universal receiver triode for detector, RF, and AF service.
General specifications
Tube and section characteristics
Properties common to every published source and operating point.
Heater and base
- Base
- -
- Socket code
- -
- Base pins
- -
- Nominal heater voltage
- 1.5 V
- Nominal heater current
- 250 mA
- Parallel heater voltage
- -
- Parallel heater current
- -
- Series capable
- No
Terminal pinout
Electrical assignments shared by every tube using this base designation.
No verified pinout is recorded for this base designation.
Section ratings
1 physical section, each with unique specifications.
Section 1
Triode
X-ray radiationInterelectrode capacitances
No fixed ratings are recorded for this section.
Published ratings and characteristics promoted from the supplied Telefunken source where explicitly readable. Telefunken RE84 directly heated oxide-coated filament universal receiving triode for detector and audio stages, including moderate loudspeaker output service. Manufacturer gives nominal filament about 1.5 V, 0.25 A, anode service range 50–100 V and approximate emission 10–15 mA. Closely related RE88 and RE95 have different base arrangements. Published voltage range is service information, not a proven universal absolute maximum.
Source-dependent data
Operating conditions by source
Each block preserves the test conditions and published values from one reference. Values from different sources are intentionally kept separate.