Data set 01
1959 Telefunken
Published operating points and test conditions from this source.
SECTION 1
Triode
Characteristic
HeaterOrFilamentVoltage
4 V
HeaterOrFilamentCurrent
150 mA
Voltage - Triode (single) ·Triode
RE114
Directly heated Telefunken receiving triode with a wide published plate-voltage operating range; available evidence does not justify a narrower functional category.
Directly heatedCold cathodeCommon cathodeDissimilar
- Sections
- 1
- Base
- -
- Socket code
- -
- Base pins
- -
- Nominal heater
- 4 V / 150 mA
Description
Directly heated Telefunken triode with a wide published plate-voltage operating range.
General specifications
Tube and section characteristics
Properties common to every published source and operating point.
Heater and base
- Base
- -
- Socket code
- -
- Base pins
- -
- Nominal heater voltage
- 4 V
- Nominal heater current
- 150 mA
- Parallel heater voltage
- -
- Parallel heater current
- -
- Series capable
- No
Terminal pinout
Electrical assignments shared by every tube using this base designation.
No verified pinout is recorded for this base designation.
Section ratings
1 physical section, each with unique specifications.
Section 1
Triode
X-ray radiationInterelectrode capacitances
No fixed ratings are recorded for this section.
Published ratings and characteristics promoted from the supplied Telefunken source where explicitly readable. Telefunken RE114 directly heated 4 V, approximately 0.15 A receiving triode with a high-efficiency low-temperature filament whose glow may be invisible. Source gives approximate plate operating range 40–450 V without clearly defining a universal absolute maximum; preserve MaxPlateVoltage as unknown.
Source-dependent data
Operating conditions by source
Each block preserves the test conditions and published values from one reference. Values from different sources are intentionally kept separate.