Power - Triode (over 1000V 100W) ·Triode
Forced-air-cooled Tesla transmitting triode for AF and RF amplification, oscillators, industrial RF heating, and ultrasonic generators. Approximately 1.5 kW plate dissipation and 10 kV capability provide versatile professional power.
Forced-air-cooled transmitting triode with 1.5 kW anode dissipation for AF or RF power amplification and oscillation up to 30 MHz, including industrial RF heating and ultrasonic generators.
General specifications
Properties common to every published source and operating point.
Electrical assignments shared by every tube using this base designation.
No verified pinout is recorded for this base designation.
1 physical section, each with unique specifications.
Section 1
Published maximum ratings and characteristics promoted from the approved source.
Source-dependent data
Each block preserves the test conditions and published values from one reference. Values from different sources are intentionally kept separate.
Data set 01
Published operating points and test conditions from this source.
Heater Voltage
12.5 to 13.5 V
Published range
Heater Current
39 A to 43 A
Published range
Maximum Plate Dissipation
1500 W
Maximum Frequency
30 MHz
Data set 02
Published operating points and test conditions from this source.
Heater voltage
12.5 to 13.5 V
Heater current
39 A to 43 A
Maximum anode current
600 mA
Maximum grid current
120 mA
Maximum frequency
30 MHz
Forced-air flow
5 m3/min
Anode cooling
Maximum radiator temperature
150 degC
Cooling
Maximum pin temperature
180 degC
Cooling
Amplification factor
22 to 30
Plate resistance
6000 to 9000 ohm
Emission current
3.7 A