Power - Triode (over 1000V 100W) ·Triode
Massive water-cooled Tesla transmitting triode for very-high-power RF amplification, including modulated service. Approximately 150 kW plate dissipation and 20 kV capability support enormous professional transmitter output.
Water-cooled directly heated transmitting triode with 150 kW anode dissipation for high-frequency power amplification, including modulated service up to 30 MHz.
General specifications
Properties common to every published source and operating point.
Electrical assignments shared by every tube using this base designation.
No verified pinout is recorded for this base designation.
1 physical section, each with unique specifications.
Section 1
Maximum anode voltage also has lower condition-specific limits for modulated/higher-frequency service; preserved in parameters/notes.
Source-dependent data
Each block preserves the test conditions and published values from one reference. Values from different sources are intentionally kept separate.
Data set 01
Published operating points and test conditions from this source.
Heater Voltage
31.5 to 34 V
Published range
Heater Current
440 A to 470 A
Published range
Maximum Plate Voltage
20000 V
Highest published maximum rating
Maximum Plate Dissipation
150000 W
Maximum Frequency
30 MHz
Data set 02
Published operating points and test conditions from this source.
Heater voltage
31.5 to 34 V
Heater current
440 A to 470 A
Maximum anode current
20 A
Maximum grid current
4.5 A
Maximum frequency
30 MHz
Cooling-water flow
150 L/min
1.5 kg/cm2 pressure
Forced-air flow
6 m3/min
160 mm water-column pressure
Grid-cathode capacitance
101 pF
Anode-cathode capacitance
6 pF
Anode-grid capacitance
51 pF
Amplification factor
40 to 48
Plate resistance
800 to 1200 ohm
Emission current
100 A