Power - TV Vertical Output ·Pentode
Series-heater power pentode for both audio output and television vertical/frame-deflection service.
Power pentode for television vertical-deflection and audio-frequency output amplification. The supplied French datasheet was translated to English for descriptive output.
Small-button Noval 9-contact
General specifications
Properties common to every published source and operating point.
Electrical assignments shared by every tube using this base designation.
| Terminal | Section | Connection | Evidence |
|---|---|---|---|
| PIN1IC | — | IC EIA transcription, manufacturer confirmation pending | Unverified EIA Base Connections, printed page 131, 9CV |
| PIN2G1 | A | G1 — Control Grid EIA transcription, manufacturer confirmation pending | Unverified EIA Base Connections, printed page 131, 9CV |
| PIN3G3 | A | G3 — Suppressor GridGroup 9CV3 EIA transcription, manufacturer confirmation pending | Unverified EIA Base Connections, printed page 131, 9CV |
| PIN3K | A | K — CathodeGroup 9CV3 EIA transcription, manufacturer confirmation pending | Unverified EIA Base Connections, printed page 131, 9CV |
| PIN4H | — | H — Heater EIA transcription, manufacturer confirmation pending | Unverified EIA Base Connections, printed page 131, 9CV |
| PIN5H | — | H — Heater EIA transcription, manufacturer confirmation pending | Unverified EIA Base Connections, printed page 131, 9CV |
| PIN6IC | — | IC EIA transcription, manufacturer confirmation pending | Unverified EIA Base Connections, printed page 131, 9CV |
| PIN7P | A | P — Plate (Anode) EIA transcription, manufacturer confirmation pending | Unverified EIA Base Connections, printed page 131, 9CV |
| PIN8IC | — | IC EIA transcription, manufacturer confirmation pending | Unverified EIA Base Connections, printed page 131, 9CV |
| PIN9G2 | A | G2 — Screen Grid EIA transcription, manufacturer confirmation pending | Unverified EIA Base Connections, printed page 131, 9CV |
1 physical section, each with unique specifications.
Section 1
Filename-matched Russian entry only.
Source-dependent data
Each block preserves the test conditions and published values from one reference. Values from different sources are intentionally kept separate.
Data set 01
Published operating points and test conditions from this source.
Heater voltage
15 V
Published nominal value or midpoint of published range
Heater current
300 mA
Published nominal value or midpoint of published range
Input capacitance
13 pF
Published first-page value
Output capacitance
7 pF
Published first-page value
Data set 02
Published operating points and test conditions from this source.
Application
Frame time-base output / audio output
Peak positive anode voltage
2000 V
Pulse
Audio operation
Published
ClassA
Push-pull audio operation
Published
ClassAB,PushPull
Data set 03
Published operating points and test conditions from this source.
Plate voltage
170 V
AudioOutput;ClassA
Screen voltage
170 V
AudioOutput;ClassA
Control-grid voltage
-12.5 V
AudioOutput;ClassA
Plate current
70 mA
AudioOutput;ClassA
Screen current
3.5 mA
AudioOutput;ClassA
Peak plate current
220 mA
FrameOutput
Application
AF output or vertical/frame output
Section1
Transconductance
11000 µS
Section1
Plate resistance
26000 Ω
Section1
Amplification factor
8
Section1
Data set 04
Published operating points and test conditions from this source.
Plate supply voltage
600 V
ClassA;ClassAB
Screen-grid supply voltage
600 V
ClassA;ClassAB
Peak positive-pulse plate voltage
2200 V
VerticalDeflection
Peak cathode current
240 mA
VerticalDeflection
Plate voltage
170 V
ClassA
Screen-grid voltage
170 V
ClassA
Grid No.1 voltage
-12.5 V
ClassA
Plate current
70 mA
ClassA
Screen-grid current
3.5 mA
ClassA
Grid No.1 to plate capacitance
0.6 pF
Grid No.1 input capacitance
13 pF
Plate output capacitance
6.8 pF
Data set 05
Published operating points and test conditions from this source.
TENSION fÎlAMENt …………ccsrersesernerecenmencaenea
15 V
Courant filament ……s … If
300 mA
Data set 06
Published operating points and test conditions from this source.
Heater voltage
15 V
Published nominal value
Heater current
300 mA
Published nominal value
Maximum plate dissipation
12 W
Published maximum rating
Maximum peak anode voltage
2 kV
Frame-output pulse service
Audio output power
5.3 W
Published quick-reference value
Data set 07
Published operating points and test conditions from this source.
Heater voltage
15 V
Published nominal value
Heater current
300 mA
Published nominal value
Transconductance
10000 µS
Published operating characteristic
Maximum plate dissipation
12 W
Published maximum rating
Maximum positive peak anode voltage
2 kV
Pulse operation
Application
Frame output stage
Printed source application
Data set 08
Published operating points and test conditions from this source.
Heater Voltage (ac/dc) 8 10.6
15 V
Published in approved XL86 target datasheet entry; Section1
Heater Current 0.76 0.6 0.45
300 mA
Published in approved XL86 target datasheet entry; Section1
Plate Supply Voltage
600 V
Published in approved XL86 target datasheet entry; Section1
Grid-No.2 Voltage
220 V
Published in approved XL86 target datasheet entry; Section1
Grid-No.2 (Screen-Grid) Supply Voltage
600 V
Published in approved XL86 target datasheet entry; Section1
Grid-No.2 Input
2.1 W
Published in approved XL86 target datasheet entry; Section1
Peak Grid-No.2 Input
7 W
Published in approved XL86 target datasheet entry; Section1
Plate Voltage
170 V
Published in approved XL86 target datasheet entry; Section1
Grid-No.l-Circuit Resistance
1 MΩ
Published in approved XL86 target datasheet entry; Section1
Plate Voltage
275 V
Published in approved XL86 target datasheet entry; Section1
Peak Positive-Pulse Plate Voltage#
2200 V
Published in approved XL86 target datasheet entry; Section1
Grid-No.2 Voltage
275 V
Published in approved XL86 target datasheet entry; Section1
Peak Negative-Pulse Grid-No.l Voltage
250 V
Published in approved XL86 target datasheet entry; Section1
Peak Cathode Current
240 mA
Published in approved XL86 target datasheet entry; Section1
Average Cathode Current
110 mA
Published in approved XL86 target datasheet entry; Section1
Plate Dissipation
12 W
Published in approved XL86 target datasheet entry; Section1
Grid No.l to Plate
0.6 pF
Published in approved XL86 target datasheet entry; Section1
Grid No.l to Cathode, Heater, Grid No.2, and Grid No.3
13 pF
Published in approved XL86 target datasheet entry; Section1
Plate to Cathode, Heater, Grid No.2, and Grid No.3
6.8 pF
Published in approved XL86 target datasheet entry; Section1
Grid-No.2 Voltage
170 V
Published in approved XL86 target datasheet entry; Section1
Grid-No.l (Control-Grid) Voltage
12.5 V
Published in approved XL86 target datasheet entry; Section1
Plate Resistance
26000 Ω
Published in approved XL86 target datasheet entry; Section1
Transconductance
11000 µS
Published in approved XL86 target datasheet entry; Section1
Plate Current
70 mA
Published in approved XL86 target datasheet entry; Section1
Grid-No.2 Current
3.5 mA
Published in approved XL86 target datasheet entry; Section1
Data set 09
Published operating points and test conditions from this source.
Plate current
70 mA
Translated from Russian source; Ток анода . . . . . ,. . .. .. .. 70 мА
Transconductance
10 mA/V
Translated from Russian source; Крутизна характеристики . . ,. . . . ,. , 10 мА/В
Amplification factor
2
Translated from Russian source; Коэффициент усиления по 2-й сетке относительно
Heater current
-315 mA
Translated from Russian source; Ток накала. . а, 285-——315
Plate voltage
250 V
Translated from Russian source; Напряжение анода г , . Ква 250 В
Cathode current
100 mA
Translated from Russian source; Ток катода , . . ‚ . . й ке 100 мА
Screen dissipation
1.75 W
Translated from Russian source; Мощность, рассеиваемая 2-й сеткой , ‚ . й 1,75 Вт
Data set 10
Published operating points and test conditions from this source.
Anode peak voltage Va,P max
2 kv
Anode peak voltage Va,P max. 2 kv
Cathode current Ik max
100 mA
Cathode current Ik max. 100 mA
Output power W,
5.3 W
Output power W, 5.3 W
Heater current I
300 mA
Heater current I 300 mA
Anode to all except grid No.1 Ca(gl)
6.8 pF
Anode to all except grid No.1 Ca(gl) 6.8 pF
Grid No.1 to all except anode Cgl(a )
13 pF
Grid No.1 to all except anode Cgl(a ) 13 pF
Anode to grid No.1 Cagl max
0.6 pF
Anode to grid No.1 Cagl max. 0.6 pF
Grid No.1 to heater Cglf " max
0.25 pF
Grid No.1 to heater Cglf " max. 0.25 pF
Supply voltage Vi 170
200 v
Supply voltage Vi 170 200 v
Load resistance Ra 2
2.5 kΩ
Load resistance Ra 2 2.5 kQ
Anode current I 75 - 76 65
64 mA
Anode current I 75 - 76 65 - 64 mA
current Ig2 4.0 - 16.5 3.2
11.4 mA
2 current Ig2 4.0 - 16.5 3.2 - 11.4 mA
Output power W, 0 0.05 5.1 0 0.05
5.3 W
Output power W, 0 0.05 5.1 0 0.05 5.3 W
Anode current Iy 56
54 mA
Anode current Iy 56 - 54 mA
Grid No.2 current Igz 2.2
9.7 mA
Grid No.2 current Igz 2.2 - 9.7 mA
Output power W, 00.05
5.4 W
Output power W, 00.05 5.4 W
Anode supply voltage Vba 200
230 v
Anode supply voltage Vba 200 230 v
Grid No.2 voltage 200
200 v
Grid No.2 voltage 200 200 v
Anode current 2x60 - 2x64.5 2x56 -~ 2x6
1 mA
Anode current 2x60 - 2x64.5 2x56 -~ 2x61 mA
Grid No.2 current 2x3.0 ~ 2x18.52x2.3 - 2x1
7.5 mA
Grid No.2 current 2x3.0 ~ 2x18.52x2.3 - 2x17.5 mA
Output power 00.05 14.3 00.05
17.5 W
Output power 00.05 14.3 00.05 17.5 W
Anode voltage Vao max
550 V
Anode voltage Vao max. 550 V
Grid No.2 voltage Vg20 max
330 V
Grid No.2 voltage Vg20 max. 330 V
Cathode current Ix max
100 mA
Cathode current Ix max. 100 mA
Cathode to heater voltage Vkf max
200 V
Cathode to heater voltage Vkf max. 200 V