Data set 01
1960 Mazda
Published operating points and test conditions from this source.
SECTION 1
Beam Power
Other
Typical Plate Voltage
160 V
Typical Screen Voltage
175 V
Power - Beam (NOT sweep) ·BeamPower
PEN383
Beam-power amplifier developed for audio-output stages of AC/DC receivers, combining approximately 10 W plate dissipation with high transconductance for economical loudspeaker power.
Directly heatedCold cathodeCommon cathodeDissimilar
- Sections
- 1
- Base
- -
- Socket code
- IO
- Base pins
- 8
- Nominal heater
- 38 V / 200 mA
Description
Indirectly heated beam-power amplifier for AC/DC receivers.
Socket description
International Octal
General specifications
Tube and section characteristics
Properties common to every published source and operating point.
Heater and base
- Base
- -
- Socket code
- IO
- Base pins
- 8
- Nominal heater voltage
- 38 V
- Nominal heater current
- 200 mA
- Parallel heater voltage
- -
- Parallel heater current
- -
- Series capable
- No
Terminal pinout
Electrical assignments shared by every tube using this base designation.
No verified pinout is recorded for this base designation.
Section ratings
1 physical section, each with unique specifications.
Section 1
Beam Power
X-ray radiationInterelectrode capacitances
- Transconductance
- 0.012 S
- Max plate voltage
- 200 V
- Max screen voltage
- 200 V
- Max plate dissipation
- 10 W
Source-dependent data
Operating conditions by source
Each block preserves the test conditions and published values from one reference. Values from different sources are intentionally kept separate.