Skip to main content

Triode - HV Shunt Regulator ·Triode

PD510

High-voltage shunt-regulator triode for stabilizing the extra-high-tension supply in color television receivers.

Directly heatedCold cathodeCommon cathodeDissimilar
Sections
1
Base
Magnoval
Socket code
B9A
Base pins
9
Nominal heater
7.3 V / 300 mA

Description

High-voltage shunt-stabilizer triode for color television receivers.

Socket description

Small-button Noval 9-contact

General specifications

Tube and section characteristics

Properties common to every published source and operating point.

Heater and base

Base
Magnoval
Socket code
B9A
Base pins
9
Nominal heater voltage
7.3 V
Nominal heater current
300 mA
Parallel heater voltage
-
Parallel heater current
-
Series capable
No

Magnoval - Terminal pinout

Electrical assignments shared by every tube using this base designation.

No verified pinout is recorded for this base designation.

Section ratings

1 physical section, each with unique specifications.

Section 1

Triode

X-ray radiationInterelectrode capacitances
Max plate voltage
25000 V
Max plate dissipation
30 W
Max cathode current
1.6 mA

Published ratings and characteristics promoted where clearly stated; identical repeated sections compressed when applicable.

Source-dependent data

Operating conditions by source

Each block preserves the test conditions and published values from one reference. Values from different sources are intentionally kept separate.

Data set 01

1972 Philips Receiving Tubes

Published operating points and test conditions from this source.

SECTION 1

Triode

Characteristics

  • Heater voltage

    7.3 V

    Published nominal value

  • Heater current

    300 mA

    Published nominal value

Other

  • Maximum plate dissipation

    30 W

    Published maximum rating

  • Maximum anode voltage

    25 kV

    Design-centre rating

  • Absolute maximum anode voltage

    27.5 kV

    Published absolute maximum

Data set 02

1999 Philips E-Z

Published operating points and test conditions from this source.

SECTION 1

Triode

Characteristic

  • Heater current If

    300 mA

  • current change from [1]

    0.1 mA

  • current change from [2]

    1.5 mA

  • Grid voltage at I3

    1.5 mA

  • at I3

    0.1 mA

  • cathode negative = Vit max

    250 V

  • Screen voltage Vs max,

    0 V

  • never exceed

    45 kV

  • voltage may rise to

    440 V

  • Vs

    0 V

Other

  • Anode voltage Va max

    25 kV

  • Anode voltage (absolute max.) Va, max

    27.5 kV

  • Anode current Ia max

    1.6 mA

  • Anode dissipation Wa max

    30 W

  • Anode dissipation (absolute max.) Wa max

    40 W

  • Negative grid voltage -Vg max

    150 A

  • Grid resistor Rg max

    5 MΩ