Data set 01
1958 Compagnie General
Published operating points and test conditions from this source.
SECTION 1
Pentode
Other
Maximum frequency
50 MHz
Application
Application
Transmitting power amplifier
Power - Pentode (NOT beam) ·Pentode
P1300
Naturally cooled transmitting power pentode designed for telecommunications transmitters below approximately 50 MHz. Its primary function is substantial radio-frequency output in professional communications equipment.
Directly heatedCold cathodeCommon cathodeDissimilar
- Sections
- 1
- Base
- -
- Socket code
- -
- Base pins
- -
- Nominal heater
- 6.3 V / 3.5 A
Description
Naturally cooled transmitting power pentode for telecommunications transmitters below 50 MHz.
General specifications
Tube and section characteristics
Properties common to every published source and operating point.
Heater and base
- Base
- -
- Socket code
- -
- Base pins
- -
- Nominal heater voltage
- 6.3 V
- Nominal heater current
- 3.5 A
- Parallel heater voltage
- -
- Parallel heater current
- -
- Series capable
- No
Terminal pinout
Electrical assignments shared by every tube using this base designation.
No verified pinout is recorded for this base designation.
Section ratings
1 physical section, each with unique specifications.
Section 1
Pentode
X-ray radiationInterelectrode capacitances
- Transconductance
- 0.015 S
Published source values promoted where applicable; additional electrical, storage, RF, pulse and cooling data retained as parameters.
Source-dependent data
Operating conditions by source
Each block preserves the test conditions and published values from one reference. Values from different sources are intentionally kept separate.