Alternatives & variations Download PDF datasheet

Voltage Regulator ·VoltageRegulator

OB2WA

Rugged special-quality 108 V gas regulator for military and industrial service, with published high shock and vibration resistance.

Directly heatedCold cathodeCommon cathodeDissimilar

Sections: 1
Base: -
Socket code: B7G
Base pins: 7
Nominal heater: -

Description

Special-quality ruggedized cold-cathode voltage stabilizer with approximately 108 V maintaining voltage.

Socket description

Miniature 7-contact

General specifications

Tube and section characteristics

Properties common to every published source and operating point.

Heater and base

Base: -
Socket code: B7G
Base pins: 7
Nominal heater voltage: -
Nominal heater current: -
Parallel heater voltage: -
Parallel heater current: -
Series capable: No

Terminal pinout

Electrical assignments shared by every tube using this base designation.

No verified pinout is recorded for this base designation.

Section ratings

1 physical section, each with unique specifications.

Section 1

Voltage Regulator

X-ray radiationInterelectrode capacitances

Regulator voltage: 108 V
Regulator minimum current: 5 mA
Regulator maximum current: 30 mA
Regulator starting voltage: 130 V
Regulator maintaining voltage: 108 V

Special-quality shock- and vibration-resistant voltage stabilizer.

Source-dependent data

Operating conditions by source

Each block preserves the test conditions and published values from one reference. Values from different sources are intentionally kept separate.

Data set 01

1963 Philips Electron Tubes Handbook V2

Published operating points and test conditions from this source.

SECTION 1

Voltage Regulator

Characteristic

Maintaining voltage at 5 mA
104 to 106 V
LifeRange
Maintaining voltage at 30 mA
109 to 112 V
LifeRange
Ignition voltage
- to 130 V
Maximum
Voltage regulation
3 to 4 V
Ia=5-30mA; life-dependent
Leakage current
- to 5 uA
Maximum

Other

Operating current minimum
5 mA
Operating current maximum
30 mA
Maximum starting current
- to 75 mA
Maximum shunt capacitance
- to 0.1 uF

Data set 02

1963 Philips Electron Tubes Handbook V3

Published operating points and test conditions from this source.

SECTION 1

Voltage Regulator

Characteristic

Maintaining voltage nominal
108 V
VoltageRegulator
Regulation maximum
3 V
5To30mA
Noise output maximum
100 mV
VoltageRegulator

Other

Maintaining current minimum
5 mA
VoltageRegulator
Maintaining current maximum
30 mA
VoltageRegulator
Starting voltage maximum
130 V
VoltageRegulator
Starting current maximum
75 mA
10Seconds
Shunt capacitance maximum
0.1 µF
VoltageRegulator
Shock resistance approximately
900 g
SpecialQuality
Vibration resistance
2.5 g
SpecialQuality