Power - Beam (NOT sweep) ·BeamPower
Special-quality rugged VHF beam-power tetrode for RF service to approximately 175 MHz in equipment exposed to vibration and shock, with statistically controlled characteristics.
SPECIAL QUALITY V.H.F. POWER TETRODE Special quality r.f. beam power tetrode for use at frequencies up to 175Mc/s in equipment where mechanical vibration and shocks are unavoidable and where statistically controlled major electrical characteristics are required. This data should be read in conjunction with GENERAL The supplied datasheet publishes electrical ratings and characteristics for this beampower device.
General specifications
Properties common to every published source and operating point.
Electrical assignments shared by every tube using this base designation.
No verified pinout is recorded for this base designation.
1 physical section, each with unique specifications.
Section 1
Promoted values taken from published characteristics and absolute/limiting ratings.
Source-dependent data
Each block preserves the test conditions and published values from one reference. Values from different sources are intentionally kept separate.
Data set 01
Published operating points and test conditions from this source.
Heater or filament voltage
6 V
Heater or filament current
750 mA
MaxPlateVoltage
300
Promoted field source value
MaxScreenVoltage
250
Promoted field source value
MaxPlateDissipation
12
Promoted field source value
MaxScreenDissipation
2
Promoted field source value
Transconductance
0.007
Promoted field source value
Amplification Factor
16
Promoted field source value