Skip to main content

Power - Pentode (NOT beam) ·Pentode

LS52

Lorenz short-wave transmitting pentode for continuous-wave and pulsed RF communications service.

Directly heatedCold cathodeCommon cathodeDissimilar
Sections
1
Base
-
Socket code
-
Base pins
-
Nominal heater
12.6 V / 700 mA

Description

Lorenz LS52 short-wave transmitting pentode for continuous-wave and pulsed RF service, with a 12.6 V indirectly heated oxide cathode and published RF operating data.

General specifications

Tube and section characteristics

Properties common to every published source and operating point.

Heater and base

Base
-
Socket code
-
Base pins
-
Nominal heater voltage
12.6 V
Nominal heater current
700 mA
Parallel heater voltage
-
Parallel heater current
-
Series capable
No

Terminal pinout

Electrical assignments shared by every tube using this base designation.

No verified pinout is recorded for this base designation.

Section ratings

1 physical section, each with unique specifications.

Section 1

Pentode

X-ray radiationInterelectrode capacitances
Transconductance
0.0045 S
Max plate voltage
800 V
Max screen voltage
400 V
Max plate dissipation
25 W
Max screen dissipation
6 W
Max cathode current
130 mA

Published ratings and characteristics were promoted when unambiguous; additional operating values are preserved in TUBE_SECTION_PARAMETER.

Source-dependent data

Operating conditions by source

Each block preserves the test conditions and published values from one reference. Values from different sources are intentionally kept separate.

Data set 01

194X Wehrmacht Rohren

Published operating points and test conditions from this source.

SECTION 1

Pentode

Capacitance

  • Grid-cathode capacitance

    12 pF

  • Plate-cathode capacitance

    4.2 pF

  • Grid-plate capacitance

    - to 0.09 pF

Other

  • Pulse maximum plate voltage

    2000 V

    Pulse operation

  • Pulse maximum screen voltage

    800 V

    Pulse operation

  • Effective cathode pulse current

    200 mA

    Pulse operation

  • Cathode peak pulse current

    1.4 A

    Pulse operation; 10 us

  • RF output power

    600 W

    Pulse; wavelength 1.2 m; Ua=1500 V; Ug2=700 V; Ug1=-200 V