Skip to main content

Power - Triode ·Triode

LPT45H

Machlett high-power directly heated triode for transmitting and RF power service.

Directly heatedCold cathodeCommon cathodeDissimilar
Sections
1
Base
-
Socket code
-
Base pins
-
Nominal heater
6 V / 60 A

Description

Refer to Machlett price list. When ordering specify designed primarily for use as switch tubes in hard- Filament Voitage: 6.0 = 5% volts tube pulse modulators for radar applications. They Filament Current: 60 amps can deliver a peak pulse power output of 1.5 mega- watts with less than 5 kilowatts driving power. Filament Starting These tubes incorporate a beamed electrode struc- ture to minimize driving power. This design avoids Amplification Factor: 130

General specifications

Tube and section characteristics

Properties common to every published source and operating point.

Heater and base

Base
-
Socket code
-
Base pins
-
Nominal heater voltage
6 V
Nominal heater current
60 A
Parallel heater voltage
-
Parallel heater current
-
Series capable
No

Terminal pinout

Electrical assignments shared by every tube using this base designation.

No verified pinout is recorded for this base designation.

Section ratings

1 physical section, each with unique specifications.

Section 1

Triode

X-ray radiationInterelectrode capacitances
Amplification factor
130
Max plate dissipation
1000 W

Promoted ratings/characteristics mapped from printed headings; device/service-specific values retained in parameters.

Source-dependent data

Operating conditions by source

Each block preserves the test conditions and published values from one reference. Values from different sources are intentionally kept separate.

Data set 01

1971 Machlette Laboratories

Published operating points and test conditions from this source.

SECTION 1

Triode

Other

  • tube pulse modulators for radar applications. They Filament Current

    60 A

    tube pulse modulators for radar applications. They Filament Current: 60 amps

  • can deliver a peak pulse power output of

    1.5

    can deliver a peak pulse power output of 1.5 mega-

  • watts with less than

    5 kW

    watts with less than 5 kilowatts driving power. Filament Starting

  • Current, maximum

    300 A

    Current, maximum: 300 amps

  • ture to minimize driving power. This design avoids Amplification Factor

    130

    ture to minimize driving power. This design avoids Amplification Factor: 130

  • low grid current results in unusually low driving cathode), approx

    63.5 MHz

    low grid current results in unusually low driving cathode), approx.: 63.5 MHz

  • When operating at peak voltage in excess of

    15

    When operating at peak voltage in excess of 15kV,

  • pressurel

    80 cfm

    pressurel: 80 cfmt

  • ure within which the tube is used. Instructions for Static Pressure

    0.3

    ure within which the tube is used. Instructions for Static Pressure: 0.3” of water

  • Air Temperature [1]

    75 C

    Air Temperature: 75°C (167 °F)

  • Air Temperature [2]

    167 C

    Air Temperature: 75°C (167 °F)

  • ma Ray Protection for Energies up to [1]

    10 mA

    ma Ray Protection for Energies up to 10 MeVv.” Temperature: 175°C (347 °F)

  • ma Ray Protection for Energies up to [2]

    175 mA

    ma Ray Protection for Energies up to 10 MeVv.” Temperature: 175°C (347 °F)

  • ma Ray Protection for Energies up to [3]

    347 mA

    ma Ray Protection for Energies up to 10 MeVv.” Temperature: 175°C (347 °F)

  • gized at [1]

    7 V

    gized at 7.0 volts for 5 minutes and then reduced to rated temperatures at less than 175 °C (347 °F) under all conditions

  • gized at [2]

    5 V

    gized at 7.0 volts for 5 minutes and then reduced to rated temperatures at less than 175 °C (347 °F) under all conditions

  • gized at [3]

    175 V

    gized at 7.0 volts for 5 minutes and then reduced to rated temperatures at less than 175 °C (347 °F) under all conditions

  • gized at [4]

    347 V

    gized at 7.0 volts for 5 minutes and then reduced to rated temperatures at less than 175 °C (347 °F) under all conditions

  • minute at rated voltage

    3

    minute at rated voltage. 3 For air-flow requirements at other temperatures and pres-

  • DC Piate Voltage [1]

    27

    DC Piate Voltage .......... 27 kv 32 kv DC Plate Voitage .......... 17 kv 25 kV 31 kV

  • DC Piate Voltage [2]

    32

    DC Piate Voltage .......... 27 kv 32 kv DC Plate Voitage .......... 17 kv 25 kV 31 kV

  • DC Piate Voltage [3]

    17

    DC Piate Voltage .......... 27 kv 32 kv DC Plate Voitage .......... 17 kv 25 kV 31 kV

  • DC Piate Voltage [4]

    25

    DC Piate Voltage .......... 27 kv 32 kv DC Plate Voitage .......... 17 kv 25 kV 31 kV

  • DC Piate Voltage [5]

    31

    DC Piate Voltage .......... 27 kv 32 kv DC Plate Voitage .......... 17 kv 25 kV 31 kV

  • Peak Piate Voitage [1]

    32

    Peak Piate Voitage ........ 32 kv 34 kv DC Grid Voltage........... -200 v -200 v -360 v

  • Peak Piate Voitage [2]

    34

    Peak Piate Voitage ........ 32 kv 34 kv DC Grid Voltage........... -200 v -200 v -360 v

  • Peak Piate Voitage [3]

    -200

    Peak Piate Voitage ........ 32 kv 34 kv DC Grid Voltage........... -200 v -200 v -360 v

  • Peak Piate Voitage [4]

    -200

    Peak Piate Voitage ........ 32 kv 34 kv DC Grid Voltage........... -200 v -200 v -360 v

  • Peak Piate Voitage [5]

    -360

    Peak Piate Voitage ........ 32 kv 34 kv DC Grid Voltage........... -200 v -200 v -360 v

  • DC Grid Voltage [1]

    -600

    DC Grid Voltage........... -600 v -600 v Pulse Positive Grid Voltage. 600 v 1200 v 680 v

  • DC Grid Voltage [2]

    -600

    DC Grid Voltage........... -600 v -600 v Pulse Positive Grid Voltage. 600 v 1200 v 680 v

  • DC Grid Voltage [3]

    600

    DC Grid Voltage........... -600 v -600 v Pulse Positive Grid Voltage. 600 v 1200 v 680 v

  • DC Grid Voltage [4]

    1200

    DC Grid Voltage........... -600 v -600 v Pulse Positive Grid Voltage. 600 v 1200 v 680 v

  • DC Grid Voltage [5]

    680

    DC Grid Voltage........... -600 v -600 v Pulse Positive Grid Voltage. 600 v 1200 v 680 v

  • Peak Positive Grid Voltage [1]

    1500

    Peak Positive Grid Voltage . 1500 v 1500 v Pulse Plate Current. ....... 25 a 65 a 30 a

  • Peak Positive Grid Voltage [2]

    1500

    Peak Positive Grid Voltage . 1500 v 1500 v Pulse Plate Current. ....... 25 a 65 a 30 a

  • Peak Positive Grid Voltage [3]

    25

    Peak Positive Grid Voltage . 1500 v 1500 v Pulse Plate Current. ....... 25 a 65 a 30 a

  • Peak Positive Grid Voltage [4]

    65

    Peak Positive Grid Voltage . 1500 v 1500 v Pulse Plate Current. ....... 25 a 65 a 30 a

  • Peak Positive Grid Voltage [5]

    30

    Peak Positive Grid Voltage . 1500 v 1500 v Pulse Plate Current. ....... 25 a 65 a 30 a

  • Peak Negative Grid Voltage [1]

    -1500

    Peak Negative Grid Voltage -1500 v -1500 v Pulse Grid Current ........ 1 a 3 a 3 a

  • Peak Negative Grid Voltage [2]

    -1500

    Peak Negative Grid Voltage -1500 v -1500 v Pulse Grid Current ........ 1 a 3 a 3 a

  • Peak Negative Grid Voltage [3]

    1

    Peak Negative Grid Voltage -1500 v -1500 v Pulse Grid Current ........ 1 a 3 a 3 a

  • Peak Negative Grid Voltage [4]

    3

    Peak Negative Grid Voltage -1500 v -1500 v Pulse Grid Current ........ 1 a 3 a 3 a

  • Peak Negative Grid Voltage [5]

    3

    Peak Negative Grid Voltage -1500 v -1500 v Pulse Grid Current ........ 1 a 3 a 3 a

  • Pulse Cathode Current [1]

    90 kW

    Pulse Cathode Current. . ... 90 a 90 a Pusle Driving Power .. ..... 0.8 kw 4.5 kw 3.1 kw

  • Pulse Cathode Current [2]

    90 kW

    Pulse Cathode Current. . ... 90 a 90 a Pusle Driving Power .. ..... 0.8 kw 4.5 kw 3.1 kw

  • Pulse Cathode Current [3]

    0.8 kW

    Pulse Cathode Current. . ... 90 a 90 a Pusle Driving Power .. ..... 0.8 kw 4.5 kw 3.1 kw

  • Pulse Cathode Current [4]

    4.5 kW

    Pulse Cathode Current. . ... 90 a 90 a Pusle Driving Power .. ..... 0.8 kw 4.5 kw 3.1 kw

  • Pulse Cathode Current [5]

    3.1 kW

    Pulse Cathode Current. . ... 90 a 90 a Pusle Driving Power .. ..... 0.8 kw 4.5 kw 3.1 kw

  • DC Piate Current [1]

    600 mA

    DC Piate Current.......... 600 mA 600 mA Pulse Power Output ....... 0.35 Mw 1.35 Mw 0.87 Mw

  • DC Piate Current [2]

    600 mA

    DC Piate Current.......... 600 mA 600 mA Pulse Power Output ....... 0.35 Mw 1.35 Mw 0.87 Mw

  • DC Piate Current [3]

    0.35 mA

    DC Piate Current.......... 600 mA 600 mA Pulse Power Output ....... 0.35 Mw 1.35 Mw 0.87 Mw

  • DC Piate Current [4]

    1.35 mA

    DC Piate Current.......... 600 mA 600 mA Pulse Power Output ....... 0.35 Mw 1.35 Mw 0.87 Mw

  • DC Piate Current [5]

    0.87 mA

    DC Piate Current.......... 600 mA 600 mA Pulse Power Output ....... 0.35 Mw 1.35 Mw 0.87 Mw

  • Grid Dissipation [1]

    25

    Grid Dissipation........... 25 W 25 W Piate Output Voltage....... 14 kv 21 kv 29 kv

  • Grid Dissipation [2]

    25

    Grid Dissipation........... 25 W 25 W Piate Output Voltage....... 14 kv 21 kv 29 kv

  • Grid Dissipation [3]

    14

    Grid Dissipation........... 25 W 25 W Piate Output Voltage....... 14 kv 21 kv 29 kv

  • Grid Dissipation [4]

    21

    Grid Dissipation........... 25 W 25 W Piate Output Voltage....... 14 kv 21 kv 29 kv

  • Grid Dissipation [5]

    29

    Grid Dissipation........... 25 W 25 W Piate Output Voltage....... 14 kv 21 kv 29 kv

  • Plate Dissipation [1]

    1 kW

    Plate Dissipation .......... 1.0 kW 1.0 kW Duty Factor ............... .01 .003 .01

  • Plate Dissipation [2]

    1 kW

    Plate Dissipation .......... 1.0 kW 1.0 kW Duty Factor ............... .01 .003 .01

  • Plate Dissipation [3]

    1 kW

    Plate Dissipation .......... 1.0 kW 1.0 kW Duty Factor ............... .01 .003 .01

  • Plate Dissipation [4]

    3 kW

    Plate Dissipation .......... 1.0 kW 1.0 kW Duty Factor ............... .01 .003 .01

  • Plate Dissipation [5]

    1 kW

    Plate Dissipation .......... 1.0 kW 1.0 kW Duty Factor ............... .01 .003 .01

  • Pulse Duration [1]

    10

    Pulse Duration ............ 10 psec# 10 psec#

  • Pulse Duration [2]

    10

    Pulse Duration ............ 10 psec# 10 psec#

  • Duty Factor [1]

    0.03

    Duty Factor ............... 0.03 # 0.03 #

  • Duty Factor [2]

    0.03

    Duty Factor ............... 0.03 # 0.03 #