Tube cross-reference
LF183 alternatives, equivalents, and replacements
Review exact electrical variations and directional substitutions recorded for the LF183 voltage pentode - remote cutoff (single). Compare core specifications and verify every restriction before using a replacement.
Exact variations of LF183
These designations belong to the same electrical variation group. Their names may differ because of international standards, manufacturing tolerances, or materials, but they are recorded as electrically equivalent—not merely substitutes.
4EH7 Voltage Pentode - Remote Cutoff (single)
- Base
- 9A0
- Socket
- B9A
- Base pins
- 9
- Sections
- 1
- Heater voltage
- 4.4 V
- Heater current
- 0.45 A
Replacement tubes for LF183
The following tubes are recorded as possible replacements for LF183. This direction does not establish that LF183 can replace them.
Voltage Pentode - Remote Cutoff (single)
The database records 4EH7 as a possible replacement forLF183.
No special restrictions are recorded for this substitution.
| Specification | Original tube | Replacement |
|---|---|---|
| Tube type | Voltage Pentode - Remote Cutoff (single) | Voltage Pentode - Remote Cutoff (single) |
| Construction | Pentode | Pentode |
| Base | 9AQ | 9A0 |
| Socket | B9A | B9A |
| Base pins | 9 | 9 |
| Sections | 1 | 1 |
| Heater voltage | 4.4 V | 4.4 V |
| Heater current | 0.45 A | 0.45 A |
Where LF183 can be used as the replacement
In these recorded relationships, LF183 is the replacement tube. The listed original tubes are not automatically suitable as replacements for LF183.
Voltage Pentode - Remote Cutoff (single)
The database records LF183 as a possible replacement for4EH7.
No special restrictions are recorded for this substitution.
| Specification | LF183 replacement | Original tube |
|---|---|---|
| Tube type | Voltage Pentode - Remote Cutoff (single) | Voltage Pentode - Remote Cutoff (single) |
| Construction | Pentode | Pentode |
| Base | 9AQ | 9A0 |
| Socket | B9A | B9A |
| Base pins | 9 | 9 |
| Sections | 1 | 1 |
| Heater voltage | 4.4 V | 4.4 V |
| Heater current | 0.45 A | 0.45 A |
Verify before substituting
Matching a base or heater voltage is not enough to prove that two tubes are interchangeable. Check pin connections, heater current, maximum ratings, bias requirements, warm-up behavior, and the equipment manufacturer’s service documentation before making a substitution.
View the complete LF183 specifications →