LCL85

Triode/power-pentode combination for television sync amplification and video-output service.

Directly heatedCold cathodeCommon cathodeDissimilar

Sections: 2
Base: 9LY
Socket code: B9A
Base pins: 9
Nominal heater: 18 V / 300 mA

Description

Miniature type used for sync-amplifier and video-out- 9LY put applications in television receivers. Outlines sec- tion, 6G; requires miniature 9-contact socket. Types 9GV8/XCL85, 10GV8/ LCL85, and 18GV8/PCL85 are identical with type 6GV8/ECL85 except for heater ratings. 6GV8/ 9GV8/ 10GV8/ 18GV8/ ECL85 XCL85 LCL85 PCL85

Socket description

Small-button Noval 9-contact

General specifications

Tube and section characteristics

Properties common to every published source and operating point.

Heater and base

Base: 9LY
Socket code: B9A
Base pins: 9
Nominal heater voltage: 18 V
Nominal heater current: 300 mA
Parallel heater voltage: -
Parallel heater current: -
Series capable: No

9LY - Terminal pinout

Electrical assignments shared by every tube using this base designation.

No verified pinout is recorded for this base designation.

Section ratings

2 physical sections, each with unique specifications.

Section 1

Triode

X-ray radiationInterelectrode capacitances

Plate resistance: 7600 Ω
Transconductance: 0.0065 S
Amplification factor: 50
Max plate voltage: 250 V
Max plate dissipation: 0.5 W

Published ratings and characteristics extracted from the approved RCA source. Pulse-only ratings remain parameter rows unless explicitly continuous.

Section 2

Pentode

X-ray radiationInterelectrode capacitances

Plate resistance: 25000 Ω
Transconductance: 0.0075 S
Max plate voltage: 250 V
Max screen voltage: 250 V
Max plate dissipation: 7 W
Max screen dissipation: 2 W
Max cathode current: 75 mA

Published ratings and characteristics extracted from the approved RCA source. Pulse-only ratings remain parameter rows unless explicitly continuous.

Source-dependent data

Operating conditions by source

Each block preserves the test conditions and published values from one reference. Values from different sources are intentionally kept separate.

Data set 01

1975 RCA RC30

Published operating points and test conditions from this source.

SECTION 1

Triode

Characteristic

Heater Voltage (ac/de)
18 volts
Published value from supplied target entry
Heater Current
0.3 ampere
Published value from supplied target entry
IMate Supply Voltage
550 volts
Published value from supplied target entry
Peak Plate Voltage
2000 volts
Published value from supplied target entry
DC Plate Voltage
250 volts
Published value from supplied target entry
Grid-No
550 volts
Published value from supplied target entry
Grid-No
250 volts
Published value from supplied target entry
Peak Cathode Current"
200 mA
Published value from supplied target entry
Average Cathode Current
75 mA
Published value from supplied target entry
Plate Dissipation
7 watts
Published value from supplied target entry
Plate Voltage
170 volts
Published value from supplied target entry
Grid-No
170 volts
Published value from supplied target entry
Grid-No
-15 volts
Published value from supplied target entry
Amplification Factor
50
Published value from supplied target entry
Plate Resistance ( Appro*. )
-25000 ohms
Published value from supplied target entry
Plate Current
41 mA
Published value from supplied target entry
Grid-No
2.7 mA
Published value from supplied target entry
Grid-No
1
Published value from supplied target entry

Other

Voltage ±
200
Published value from supplied target entry