Tube cross-reference
LCF802 alternatives, equivalents, and replacements
Review exact electrical variations and directional substitutions recorded for the LCF802 voltage triode pentode. Compare core specifications and verify every restriction before using a replacement.
Exact variations of LCF802
These designations belong to the same electrical variation group. Their names may differ because of international standards, manufacturing tolerances, or materials, but they are recorded as electrically equivalent—not merely substitutes.
6LX8 Power - TV Horizontal Output (sweep)
- Base
- 9DC
- Socket
- B9A
- Base pins
- 9
- Sections
- 2
- Heater voltage
- 6 V
- Heater current
- 0.45 A
Replacement tubes for LCF802
The following tubes are recorded as possible replacements for LCF802. This direction does not establish that LCF802 can replace them.
Power - TV Horizontal Output (sweep)
The database records 6LX8 as a possible replacement forLCF802.
No special restrictions are recorded for this substitution.
| Specification | Original tube | Replacement |
|---|---|---|
| Tube type | Voltage Triode Pentode | Power - TV Horizontal Output (sweep) |
| Construction | Pentode-Triode | Pentode-Triode |
| Base | 9AE | 9DC |
| Socket | B9A | B9A |
| Base pins | 9 | 9 |
| Sections | 2 | 2 |
| Heater voltage | 6 V | 6 V |
| Heater current | 0.45 A | 0.45 A |
Where LCF802 can be used as the replacement
In these recorded relationships, LCF802 is the replacement tube. The listed original tubes are not automatically suitable as replacements for LCF802.
Power - TV Horizontal Output (sweep)
The database records LCF802 as a possible replacement for6LX8.
No special restrictions are recorded for this substitution.
| Specification | LCF802 replacement | Original tube |
|---|---|---|
| Tube type | Voltage Triode Pentode | Power - TV Horizontal Output (sweep) |
| Construction | Pentode-Triode | Pentode-Triode |
| Base | 9AE | 9DC |
| Socket | B9A | B9A |
| Base pins | 9 | 9 |
| Sections | 2 | 2 |
| Heater voltage | 6 V | 6 V |
| Heater current | 0.45 A | 0.45 A |
Verify before substituting
Matching a base or heater voltage is not enough to prove that two tubes are interchangeable. Check pin connections, heater current, maximum ratings, bias requirements, warm-up behavior, and the equipment manufacturer’s service documentation before making a substitution.
View the complete LCF802 specifications →