Skip to main content

Voltage - Triode (single) ·Triode

L610

Low-frequency amplifying triode widely used also as a detector in early radio receiving equipment.

Directly heatedCold cathodeCommon cathodeDissimilar
Sections
1
Base
-
Socket code
B4
Base pins
-
Nominal heater
6 V / -

Description

Primarily a low-frequency amplifying valve, also widely used as a detector.

Socket description

European 4-pin base

General specifications

Tube and section characteristics

Properties common to every published source and operating point.

Heater and base

Base
-
Socket code
B4
Base pins
-
Nominal heater voltage
6 V
Nominal heater current
-
Parallel heater voltage
-
Parallel heater current
-
Series capable
No

Terminal pinout

Electrical assignments shared by every tube using this base designation.

No verified pinout is recorded for this base designation.

Section ratings

1 physical section, each with unique specifications.

Section 1

Triode

X-ray radiationInterelectrode capacitances
Plate resistance
7500 Ω
Transconductance
0.002 S
Amplification factor
15
Max plate voltage
150 V

Promoted values mapped from printed rating/approximate-data tables; additional operating points and capacitances retained as parameters.

Source-dependent data

Operating conditions by source

Each block preserves the test conditions and published values from one reference. Values from different sources are intentionally kept separate.

Data set 01

192X Marconi Valve

Published operating points and test conditions from this source.

SECTION 1

Triode

Other

  • Published operating data

    See source

    Operating curves/table are present on the approved one-page source; values not promoted unless unambiguous in searchable text.

Data set 02

1955 Marconi

Published operating points and test conditions from this source.

SECTION 1

Triode

Other

  • Typical Anode Voltage

    100 V

  • Typical Grid Bias

    -1.5 V