Alternatives & variations Download PDF datasheet

K484

Two-cavity microwave klystron amplifier covering approximately 5.95–6.4 GHz for CW master-oscillator, power-amplifier, or synchrodyne service.

Directly heatedCold cathodeCommon cathodeDissimilarSpecialized

Sections: 1
Base: -
Socket code: -
Base pins: 8
Nominal heater: 6.3 V / 2 A

Description

Two-cavity microwave klystron amplifier covering roughly 5950 to 6400 MHz and designed for CW master-oscillator, power-amplifier, or synchrodyne service.

General specifications

Tube and section characteristics

Properties common to every published source and operating point.

Heater and base

Base: -
Socket code: -
Base pins: 8
Nominal heater voltage: 6.3 V
Nominal heater current: 2 A
Parallel heater voltage: -
Parallel heater current: -
Series capable: No

Terminal pinout

Electrical assignments shared by every tube using this base designation.

No verified pinout is recorded for this base designation.

Section ratings

1 physical section, each with unique specifications.

Section 1

Klystron

X-ray radiationInterelectrode capacitances

No fixed ratings are recorded for this section.

Representative electrical section; promoted values mapped from published ratings/characteristics where applicable.

Source-dependent data

Operating conditions by source

Each block preserves the test conditions and published values from one reference. Values from different sources are intentionally kept separate.

Data set 01

1950 Sylvania

Published operating points and test conditions from this source.

SECTION 1

Klystron

Other

Beam voltage maximum
625 V
Published datasheet value
Beam current maximum
150 mA
Published datasheet value
Beam power input maximum
100 W
Published datasheet value
Typical RF power output
8 W
AmplifierService
Typical operating frequency
6175 MHz
AmplifierService