Skip to main content

Specialized - Magnetron ·Magnetron

JPT901

Forced-air-cooled packaged tunable magnetron for continuous-wave X-band service with amplitude-modulation capability.

Directly heatedCold cathodeCommon cathodeDissimilarSpecialized
Sections
1
Base
-
Socket code
-
Base pins
-
Nominal heater
6.3 V / 600 mA

Description

Forced-air-cooled packaged tunable magnetron for continuous-wave X-band service and amplitude modulation. Published ratings, characteristics, operating data, capacitances, microwave/noise data, or gauge-head data were retained according to the physical device and mapped only to compatible locked-schema fields.

General specifications

Tube and section characteristics

Properties common to every published source and operating point.

Heater and base

Base
-
Socket code
-
Base pins
-
Nominal heater voltage
6.3 V
Nominal heater current
600 mA
Parallel heater voltage
-
Parallel heater current
-
Series capable
No

Terminal pinout

Electrical assignments shared by every tube using this base designation.

No verified pinout is recorded for this base designation.

Section ratings

1 physical section, each with unique specifications.

Section 1

Magnetron

X-ray radiationInterelectrode capacitances
Max plate voltage
1100 V
Max plate dissipation
60 W
Max cathode current
100 mA

CW tunable magnetron; anode voltage/current/power mapped to closest promoted fields.

Source-dependent data

Operating conditions by source

Each block preserves the test conditions and published values from one reference. Values from different sources are intentionally kept separate.

Data set 01

1999 Philips E-Z

Published operating points and test conditions from this source.

SECTION 1

Magnetron

Characteristics

  • Frequency range

    9150 to 9600 MHz

  • Typical anode voltage range

    900-1100 V

    Ia=50mA

  • Frequency pulling maximum

    20 MHz

    VSWR=1.5

  • Frequency pushing maximum

    1 MHz/mA

  • Tuning range

    450 MHz

Other

  • Maximum anode voltage

    1100 V

  • Maximum anode current

    100 mA

    ModulatedCW

  • Maximum anode input power

    60 W

  • Minimum output power

    5 W