Data set 01
1944 Hytron
Published operating points and test conditions from this source.
SECTION 1
Tetrode
Characteristics
Heater or filament current
150 mA
Published nominal value
Voltage Tetrode ·Tetrode
HY615
Hytron special-purpose tetrode with high amplification factor and moderate plate dissipation, intended for electronic amplification service under the published engineering ratings.
Directly heatedCold cathodeCommon cathodeDissimilar
- Sections
- 1
- Base
- -
- Socket code
- -
- Base pins
- -
- Nominal heater
- 6.3 V / 150 mA
Description
a - 39 HYTRONIC& Enginesring Bulletin Type HY 615 615 - 1 PHYSTCAT, DATA Plate Processed Nickel Grig Molybdenum-Nickel Bulp T-9 Base Special Octal & Pin Insulation Ceramic Plate Lead Metal Top Cap Grld Lead Matal Top Cap Max, Overall Length 2-7/16" Max. Overall Diameter 1-5/18" Het Welght 1-1/8 e=z. 31 [RTE ENas) PREES RTINS ELECTRICAL CHARACTERISTICS Heater Veoltage G.3 voltas I3 BT ST EEIL i {(4.¢. or D.C.) Heater Current 0.15 amp. D.C. Plate Voltapge 00 wolts max. D.C, Plate Current 20 ma. max. D.C., Grid Current 4 M. MEAX. Awmplification Factor 282 Mutual Conductance 2200 umhos Plate Resistance 10000 ohma [actual size) Plate Disasipation 3.5 watts max. SRR ee T INTER=-ELECTRODE GAPACITAN
General specifications
Tube and section characteristics
Properties common to every published source and operating point.
Heater and base
- Base
- -
- Socket code
- -
- Base pins
- -
- Nominal heater voltage
- 6.3 V
- Nominal heater current
- 150 mA
- Parallel heater voltage
- -
- Parallel heater current
- -
- Series capable
- No
Terminal pinout
Electrical assignments shared by every tube using this base designation.
No verified pinout is recorded for this base designation.
Section ratings
1 physical section, each with unique specifications.
Section 1
Tetrode
X-ray radiationInterelectrode capacitances
- Plate resistance
- 10000 Ω
- Max plate voltage
- 300 V
Promoted ratings/characteristics from HY615.pdf.
Source-dependent data
Operating conditions by source
Each block preserves the test conditions and published values from one reference. Values from different sources are intentionally kept separate.