HP1018

High-frequency pentode for radio detector, RF and IF amplifier, and automatic-volume-control service in universal receivers. Detection is an explicit primary manufacturer application alongside receiver amplification.

Directly heatedCold cathodeCommon cathodeDissimilar

Sections: 1
Base: -
Socket code: B6
Base pins: 6
Nominal heater: 10 V / 180 mA

Description

High-frequency pentode for detector, RF and IF amplifier stages and automatic volume-control service in universal receivers.

Socket description

European 6-pin base

General specifications

Tube and section characteristics

Properties common to every published source and operating point.

Heater and base

Base: -
Socket code: B6
Base pins: 6
Nominal heater voltage: 10 V
Nominal heater current: 180 mA
Parallel heater voltage: -
Parallel heater current: -
Series capable: No

Terminal pinout

Electrical assignments shared by every tube using this base designation.

No verified pinout is recorded for this base designation.

Section ratings

1 physical section, each with unique specifications.

Section 1

Pentode

X-ray radiationInterelectrode capacitances

Plate resistance: 1200000 Ω
Transconductance: 0.00125 S
Max plate voltage: 250 V
Max screen voltage: 100 V

Published ratings and characteristics promoted from the approved source.

Source-dependent data

Operating conditions by source

Each block preserves the test conditions and published values from one reference. Values from different sources are intentionally kept separate.

Data set 01

195X Tunsgram

Published operating points and test conditions from this source.

SECTION 1

Pentode

Other

HeaterVoltageNominal
10 V
Nominal
HeaterCurrentNominal
180 mA
Nominal
Maximum Plate Voltage
250 V
Maximum Screen Voltage
100 V

Characteristic

Transconductance
1250 µS
Typical
Amplification Factor
1500
Typical
Plate Resistance
1200000 ohm
Typical