HFI487

Rugged high-power industrial triode for radio-frequency power service.

Directly heatedCold cathodeCommon cathodeDissimilar

Sections: 1
Base: -
Socket code: -
Base pins: -
Nominal heater: 7.5 V / -

Description

High-power industrial triode of simple rugged construction for RF power service.

General specifications

Tube and section characteristics

Properties common to every published source and operating point.

Heater and base

Base: -
Socket code: -
Base pins: -
Nominal heater voltage: 7.5 V
Nominal heater current: -
Parallel heater voltage: -
Parallel heater current: -
Series capable: No

Terminal pinout

Electrical assignments shared by every tube using this base designation.

No verified pinout is recorded for this base designation.

Section ratings

1 physical section, each with unique specifications.

Section 1

Triode

X-ray radiationInterelectrode capacitances

Max plate voltage: 6000 V
Max plate dissipation: 2000 W

Published ratings and characteristics promoted from the supplied CSF source where explicitly available. CSF HFI487 directly heated thoriated-tungsten industrial RF power triode with natural convection/radiative anode cooling. Continuous anode voltage limit 6000 V at the lower operating-frequency range, reduced to 5000 V at higher frequencies. Maximum continuous anode dissipation 2000 W; 3000 W is permitted only in specified intermittent service with duty-cycle constraints. Vertical mounting required.

Source-dependent data

Operating conditions by source

Each block preserves the test conditions and published values from one reference. Values from different sources are intentionally kept separate.

No source-specific operating conditions are recorded.