Alternatives & variations Download PDF datasheet

GVSA1000

Two-electrode cold-cathode corona regulator providing approximately 1 kV stabilization at no more than about 100 µA.

Directly heatedCold cathodeCommon cathodeDissimilar

Sections: 1
Base: -
Socket code: -
Base pins: -
Nominal heater: -

Description

Two-electrode gas-filled cold-cathode voltage-regulator tube for approximately 1 kV corona service. The same source also identifies this device as GVSA1000.

General specifications

Tube and section characteristics

Properties common to every published source and operating point.

Heater and base

Base: -
Socket code: -
Base pins: -
Nominal heater voltage: -
Nominal heater current: -
Parallel heater voltage: -
Parallel heater current: -
Series capable: No

Terminal pinout

Electrical assignments shared by every tube using this base designation.

No verified pinout is recorded for this base designation.

Section ratings

1 physical section, each with unique specifications.

Section 1

Voltage Regulator

X-ray radiationInterelectrode capacitances

Regulator voltage: 1000 V
Regulator minimum current: 0 mA
Regulator maximum current: 0.1 mA
Regulator starting voltage: 1200 V
Regulator maintaining voltage: 1000 V

Source-dependent data

Operating conditions by source

Each block preserves the test conditions and published values from one reference. Values from different sources are intentionally kept separate.

Data set 01

1950 Victoreen

Published operating points and test conditions from this source.

SECTION 1

Voltage Regulator

Characteristic

RegulatedVoltage
1000 V
VoltageRegulation
20 V
Published current range
Temperature Coefficient
80 mV/C

Other

StartingOrBreakdownVoltage
1200 V
MinimumRegulatorCurrent
0 uA
MaximumRegulatorCurrent
100 uA