Data set 01
1963 Siemens
Published operating points and test conditions from this source.
SECTION 1
Rectifier
Other
Maximum operating frequency
150 Hz
Surge current
20 A
0.1 s
Preheat time after transport
10 min
AfterTransport
Rectifier - Half Wave ·Rectifier
GLE100000251
Siemens single-anode mercury-filled half-wave rectifier for high-voltage installations, providing approximately 10 kV inverse-voltage capability and moderate current.
Directly heatedCold cathodeCommon cathodeDissimilar
- Sections
- 1
- Base
- -
- Socket code
- EDISON
- Base pins
- -
- Nominal heater
- 2.5 V / 4.8 A
Description
Single-anode mercury-filled rectifier tube for use in high-voltage installations.
Socket description
Edison screw base
General specifications
Tube and section characteristics
Properties common to every published source and operating point.
Heater and base
- Base
- -
- Socket code
- EDISON
- Base pins
- -
- Nominal heater voltage
- 2.5 V
- Nominal heater current
- 4.8 A
- Parallel heater voltage
- -
- Parallel heater current
- -
- Series capable
- No
Terminal pinout
Electrical assignments shared by every tube using this base designation.
No verified pinout is recorded for this base designation.
Section ratings
1 physical section, each with unique specifications.
Section 1
Rectifier
X-ray radiationInterelectrode capacitances
- Rectifier peak inverse voltage
- 10000 V
- Rectifier nominal output current
- 250 mA
- Rectifier peak forward current
- 20 A
- Rectifier forward voltage drop
- 12 V
- Rectifier warm-up time
- 10 s
Source-dependent data
Operating conditions by source
Each block preserves the test conditions and published values from one reference. Values from different sources are intentionally kept separate.