Data set 01
1960 Mazda
Published operating points and test conditions from this source.
SECTION 1
Triode
Other
Maximum internal-shield voltage
-250 V
Maximum grid 1 voltage
10 V
Voltage - Triode (single) ·Triode
F9116
Triode for general electronic service. Available source material does not establish a narrower functional application confidently.
Directly heatedCold cathodeCommon cathodeDissimilar
- Sections
- 1
- Base
- -
- Socket code
- -
- Base pins
- -
- Nominal heater
- 6.3 V / 150 mA
Description
High-insulation electrometer tube intended for high-voltage measurements using an inverted-triode connection.
General specifications
Tube and section characteristics
Properties common to every published source and operating point.
Heater and base
- Base
- -
- Socket code
- -
- Base pins
- -
- Nominal heater voltage
- 6.3 V
- Nominal heater current
- 150 mA
- Parallel heater voltage
- -
- Parallel heater current
- -
- Series capable
- No
Terminal pinout
Electrical assignments shared by every tube using this base designation.
No verified pinout is recorded for this base designation.
Section ratings
1 physical section, each with unique specifications.
Section 1
Triode
X-ray radiationInterelectrode capacitances
- Plate resistance
- 1260 Ω
- Amplification factor
- 0.08
Published ratings and characteristics promoted where clearly stated; identical repeated sections compressed where applicable.
Source-dependent data
Operating conditions by source
Each block preserves the test conditions and published values from one reference. Values from different sources are intentionally kept separate.
Data set 02
1968 Mazda Belvu
Published operating points and test conditions from this source.
SECTION 1
Triode
Characteristics
Heater or filament voltage
6.3 V
Published nominal or stated operating value
Heater or filament current
150 mA
Published nominal or stated operating value
Grid-1 current
1 mA
Inverted-triode nominal condition
Grid-2 current
0.0005 mA
Maximum