Data set 01
1962 ITT
Published operating points and test conditions from this source.
TravelingWave
Other
THE F=T7 [1]
525
THE F=T7525 1S A 5 WATT CW TRAVELING WAVE AMPLIFIER TUBE HAVING 20 DB GAIN
THE F=T7 [2]
1
THE F=T7525 1S A 5 WATT CW TRAVELING WAVE AMPLIFIER TUBE HAVING 20 DB GAIN
THE F=T7 [3]
5
THE F=T7525 1S A 5 WATT CW TRAVELING WAVE AMPLIFIER TUBE HAVING 20 DB GAIN
THE F=T7 [4]
20
THE F=T7525 1S A 5 WATT CW TRAVELING WAVE AMPLIFIER TUBE HAVING 20 DB GAIN
AND [1]
8
AND 8.0 TO 12.0 KMC FREQUENCY RANGE. [T IS CONSTRUCTED IN A RUGGED METAL
AND [2]
12
AND 8.0 TO 12.0 KMC FREQUENCY RANGE. [T IS CONSTRUCTED IN A RUGGED METAL
COLLECTOR COOLER, WHICH
1
COLLECTOR COOLER, WHICH 1S REQUIRED TO PROVIDE A UNIFORM MAGNETIC FIELD.
Published value
1
1S SUITABLE FOR EITHER CW OR PULSE SERVICE.
HEATER VOLTAGE
6.3 V
HEATER VOLTAGE 6.3 (L) VoLTs
HEATER CURRENT
1.7 A
HEATER CURRENT 1.7 AMPERES
MaAX IMUM FREQUENCY
12
MaAX IMUM FREQUENCY 12.0 KMC
MiNIMUM FREQUENCY
8
MiNIMUM FREQUENCY 8.0 KMC
Max iMuM ANODE VoiTace (NoTe [1]
1
Max iMuM ANODE VoiTace (NoTe 1) 4000 VoLTs
Max iMuM ANODE VoiTace (NoTe [2]
4000
Max iMuM ANODE VoiTace (NoTe 1) 4000 VoLTs
MAX iMuM HEL IX CURRENT (NoTE [1]
2 A
MAX iMuM HEL IX CURRENT (NoTE 2) 3 MA
MAX iMuM HEL IX CURRENT (NoTE [2]
3 A
MAX iMuM HEL IX CURRENT (NoTE 2) 3 MA
MAXI1MuM COLLECTOR DiSsiPATION (BEAM POWER;
240 W
MAXI1MuM COLLECTOR DiSsiPATION (BEAM POWER; 240 WATTS
SOLENOID CURRENT [1]
1 A
SOLENOID CURRENT 1l T102 Awmps,
SOLENOID CURRENT [2]
2 A
SOLENOID CURRENT 1l T102 Awmps,
SOLENOID VOLTAGE [1]
140 V
SOLENOID VOLTAGE 140 to 200 Vorts D.C.
SOLENOID VOLTAGE [2]
200 V
SOLENOID VOLTAGE 140 to 200 Vorts D.C.
ANODE VOLTAGE
3800 V
ANODE VOLTAGE 3800 VoLts
ANODE CURRENT
50 A
ANODE CURRENT 50 wMa
HeLi1x CURRENT
1 A
HeLi1x CURRENT 1.0 wMa
Power OuTPUT
5 W
Power OuTPUT 5 WATTS NOMINAL
GAIN
20
GAIN 20 pB NOMINAL
BeaM
1
BeaM 1.0
NOTE
1 V
NOTE 1: ALL VOLTAGES SHOWN ARE WITH RESPECT TO CATHODE. ANODE, COLLECTOR
NoTE
2 A
NoTE 2: THE HELIX CURRENT SHOULD BE MINIMIZED AND MUST BE LESS THAN THE
RATION, THE PEAK HELIX CURRENT MAY EXCEED
3 A
RATION, THE PEAK HELIX CURRENT MAY EXCEED 3 MA BUT CARE SHOULD BE
NoTe
3 V
NoTe 3: THE CONTROL ELECTRODE VOLTAGE IS ADJUSTED FOR BEST TRANSMISSION
FOR CW OPERATION (NORMALLY ABOUT
-30
FOR CW OPERATION (NORMALLY ABOUT -30 voLTS). BEAM GATE OFF CAN BE
ACCOMPL ISHED BY APPLYING VOLTAGE OF = [1]
400 V
ACCOMPL ISHED BY APPLYING VOLTAGE OF =400 70 -500 voLTs. THE Tust
ACCOMPL ISHED BY APPLYING VOLTAGE OF = [2]
70 V
ACCOMPL ISHED BY APPLYING VOLTAGE OF =400 70 -500 voLTs. THE Tust
ACCOMPL ISHED BY APPLYING VOLTAGE OF = [3]
-500 V
ACCOMPL ISHED BY APPLYING VOLTAGE OF =400 70 -500 voLTs. THE Tust
oF = [1]
50
oF =50 10 ~LOO voLTS. FOR GATED BEAM (PULSE) OPERATION, THE
oF = [2]
10
oF =50 10 ~LOO voLTS. FOR GATED BEAM (PULSE) OPERATION, THE
Published value
3
3 Black Anode
Published value
4
4 Brown Heater