Data set 01
1962 ITT
Published operating points and test conditions from this source.
TravelingWave
Other
The F [1]
7339
The F-7339 is a 1 kilowatt pulse traveling wave amplifier tube having 27 db
The F [2]
1
The F-7339 is a 1 kilowatt pulse traveling wave amplifier tube having 27 db
The F [3]
27
The F-7339 is a 1 kilowatt pulse traveling wave amplifier tube having 27 db
gain and [1]
8500
gain and 8500 to 9600 mc frequency range. It is constructed in a rugged metal
gain and [2]
9600
gain and 8500 to 9600 mc frequency range. It is constructed in a rugged metal
used. Duty cycles up to [1]
5
used. Duty cycles up to .005 and pulse widths up to 10 microseconds can be used.
used. Duty cycles up to [2]
10
used. Duty cycles up to .005 and pulse widths up to 10 microseconds can be used.
Heater Voltage [1]
6.3 V
Heater Voltage 6.3 (£10%) wvolts
Heater Voltage [2]
10 V
Heater Voltage 6.3 (£10%) wvolts
Heater Current
2.5 A
Heater Current 2.5 amperes
Maximum Anode Voltage (Note [1]
1 V
Maximum Anode Voltage (Note 1) 12 kilovolts peak
Maximum Anode Voltage (Note [2]
12 V
Maximum Anode Voltage (Note 1) 12 kilovolts peak
Maximum Shell Current (Note [1]
2 A
Maximum Shell Current (Note 2) 0.5 ampere peak
Maximum Shell Current (Note [2]
500 mA
Maximum Shell Current (Note 2) 0.5 ampere peak
Maximum Collector Voltage (Note [1]
3 V
Maximum Collector Voltage (Note 3) 12.5 kilovolts peak
Maximum Collector Voltage (Note [2]
12.5 V
Maximum Collector Voltage (Note 3) 12.5 kilovolts peak
Maximum Collector Dissipation (Note [1]
4 W
Maximum Collector Dissipation (Note 4) 150 watts average
Maximum Collector Dissipation (Note [2]
150 W
Maximum Collector Dissipation (Note 4) 150 watts average
Maximum R-F Input Power
5 W
Maximum R-F Input Power 5 watts average
Maximum R-F Output Power
10 W
Maximum R-F Output Power 10 watts average
Maximum Pulse Width (Beam)
10
Maximum Pulse Width (Beam) 10 microseconds
Maximum Cathode Current
2.5 A
Maximum Cathode Current 2.5 amperes peak
Maximum Frequency (Note [1]
5
Maximum Frequency (Note 5) 9600 mc
Maximum Frequency (Note [2]
9600
Maximum Frequency (Note 5) 9600 mc
Minimum Frequency (Note [1]
5
Minimum Frequency (Note 5) 8500 mc
Minimum Frequency (Note [2]
8500
Minimum Frequency (Note 5) 8500 mc
Air Flow on Collector Radiator (Note [1]
4
Air Flow on Collector Radiator (Note 4) 30 cfm
Air Flow on Collector Radiator (Note [2]
30
Air Flow on Collector Radiator (Note 4) 30 cfm
Glass Temperature
160
Glass Temperature 160°C max.
Center Frequency
9000
Center Frequency 9000 mc
Anode Voltage (Note [1]
1 V
Anode Voltage (Note 1) 11 kilovolts peak
Anode Voltage (Note [2]
11 V
Anode Voltage (Note 1) 11 kilovolts peak
Cathode Current
1.8 A
Cathode Current 1.8 amperes peak
Collector Voltage (tied to Shell)
11 V
Collector Voltage (tied to Shell) 11 kilovolts peak
Collector Current
1.5 A
Collector Current 1.5 amperes peak
Power Output (at center frequency)
1.5 W
Power Output (at center frequency) 1.5 kilowatts peak
Bandwidth for Po = [1]
1
Bandwidth for Po = 1 kilowatt 8.5to0 9.6 kmc
Bandwidth for Po = [2]
8.5
Bandwidth for Po = 1 kilowatt 8.5to0 9.6 kmc
Bandwidth for Po = [3]
9.6
Bandwidth for Po = 1 kilowatt 8.5to0 9.6 kmc
Gain (Note [1]
6
Gain (Note 6) 27 db
Gain (Note [2]
27
Gain (Note 6) 27 db
Pulse Width
2
Pulse Width 2 microseconds
Note
1 V
Note 1: All voltages shown are with respect to cathode. Anode and helix are
Note
2 A
Note 2: The shell current is the difference between cathode current and collect-
Note
3
Note 3: The tube may be operated with the collector tied to the shell (anode and
Note
4 W
Note 4: Forced air cooling is required for average collector power in excess
of
10 W
of 10 watts. As the collector power is increased, the air flow re-
quired increases. At the maximum collector power of
150 W
quired increases. At the maximum collector power of 150 watts, a
Note [1]
5 W
Note 5: Useful gain and power output exists below 8500 mc and above 9600 mc
Note [2]
8500 W
Note 5: Useful gain and power output exists below 8500 mc and above 9600 mc
Note [3]
9600 W
Note 5: Useful gain and power output exists below 8500 mc and above 9600 mc
Note [1]
6 W
Note 6: This gain is obtained over the 8.5 to 9. 6 kmc bandwidth at the power
Note [2]
8.5 W
Note 6: This gain is obtained over the 8.5 to 9. 6 kmc bandwidth at the power
Note [3]
9 W
Note 6: This gain is obtained over the 8.5 to 9. 6 kmc bandwidth at the power
Note [4]
6 W
Note 6: This gain is obtained over the 8.5 to 9. 6 kmc bandwidth at the power
signal gain will be approximately
10
signal gain will be approximately 10 db higher.
( [1]
1 V
(1) Heater warm up of 2 minutes before applying high voltage is recommended.
( [2]
2 V
(1) Heater warm up of 2 minutes before applying high voltage is recommended.
Published value
2
2 Heater -Cathode
Published value
10
10 Heater