Data set 01
1962 ITT
Published operating points and test conditions from this source.
TravelingWave
Other
The F [1]
6825
The F-6825 is a 1 kilowatt pulse traveling wave amplifier tube having 30 db gain
The F [2]
1
The F-6825 is a 1 kilowatt pulse traveling wave amplifier tube having 30 db gain
The F [3]
30
The F-6825 is a 1 kilowatt pulse traveling wave amplifier tube having 30 db gain
and [1]
2000 MHz
and 2000 to 4000 mc frequency range. It is constructed in a rugged metal envelope
and [2]
4000 MHz
and 2000 to 4000 mc frequency range. It is constructed in a rugged metal envelope
Published value [1]
5
. 005 and pulse widths up to 15 microseconds can be used.
Published value [2]
15
. 005 and pulse widths up to 15 microseconds can be used.
Heater Voltage [1]
6.3 V
Heater Voltage 6.3 (£10%) volts
Heater Voltage [2]
10 V
Heater Voltage 6.3 (£10%) volts
Heater Current
5 A
Heater Current : 5.0 amperes
Maximum Anode Voltage (Note [1]
1 V
Maximum Anode Voltage (Note 1) 8500 wvolts peak
Maximum Anode Voltage (Note [2]
8500 V
Maximum Anode Voltage (Note 1) 8500 wvolts peak
Maximum Shell Current (Note [1]
2 A
Maximum Shell Current (Note 2) 0.5 ampere peak
Maximum Shell Current (Note [2]
500 mA
Maximum Shell Current (Note 2) 0.5 ampere peak
Maximum Collector Voltage (Note [1]
3 V
Maximum Collector Voltage (Note 3) 9000 volts peak
Maximum Collector Voltage (Note [2]
9000 V
Maximum Collector Voltage (Note 3) 9000 volts peak
Maximum Collector Dissipation {Note [1]
4 W
Maximum Collector Dissipation {Note 4) 150 watts average
Maximum Collector Dissipation {Note [2]
150 W
Maximum Collector Dissipation {Note 4) 150 watts average
Maximum R-F Input Power
10 W
Maximum R-F Input Power 10 watts average
Maximum R-F Output Power
20 W
Maximum R-F Output Power 20 watts average
Maximum Pulse Width (Beam)
15
Maximum Pulse Width (Beam) 15 microseconds
Maximum Cathode Current
25 A
Maximum Cathode Current 2,5 amperes peak
Maximum Frequency (Note [1]
5 MHz
Maximum Frequency (Note 5) 4000 mc
Maximum Frequency (Note [2]
4000 MHz
Maximum Frequency (Note 5) 4000 mc
Minimum Frequency (Note [1]
5 MHz
Minimum Frequency (Note 5) 2000 mc
Minimum Frequency (Note [2]
2000 MHz
Minimum Frequency (Note 5) 2000 mc
Air Flow on Collector Radiator {Note [1]
4
Air Flow on Collector Radiator {Note 4) 30 cfm
Air Flow on Collector Radiator {Note [2]
30
Air Flow on Collector Radiator {Note 4) 30 cfm
Glass Temperature
160
Glass Temperature 160°C max.
Center Frequency
3000 MHz
Center Frequency 3000 mc
Anode Voltage (Note [1]
1 V
Anode Voltage (Note 1) 8000 volts peak
Anode Voltage (Note [2]
8000 V
Anode Voltage (Note 1) 8000 volts peak
Cathode Current
1.8 A
Cathode Current 1.8 amperes peak
Collector Voltage (tied to Shell)
8000 V
Collector Voltage (tied to Shell) 8000 volts peak
Collector Current
1.5 A
Collector Current 1.5 amperes peak
Power Output (at center frequency)
2 kW
Power Output (at center frequency) 2 kw peak
Bandwidth to [1]
3 MHz
Bandwidth to 3 db power points 2,0-4.0 kmc
Bandwidth to [2]
20 MHz
Bandwidth to 3 db power points 2,0-4.0 kmc
Bandwidth to [3]
-4 MHz
Bandwidth to 3 db power points 2,0-4.0 kmc
Gain (Note [1]
6
Gain (Note 6) 30 db
Gain (Note [2]
30
Gain (Note 6) 30 db
Pulse Width
2
Pulse Width 2 | seconds
Note
1 V
Note 1: All voltages shown are with respect to cathode. Anode and helix are con-
Note
2 A
Note 2: The shell current is the difference between cathode current and collector
Note
3
Note 3: The tube may be operated with the collector tied to the shell {(anode and
difference between collector and shell must be limited to
500
difference between collector and shell must be limited to 500 volts maximum.
Note [1]
4 W
Note 4: Forced air cooling is required for average collector power in excess of 10
Note [2]
10 W
Note 4: Forced air cooling is required for average collector power in excess of 10
At the maximum collector power of [1]
150 W
At the maximum collector power of 150 watts, a minimum air flow of 20 cfm
At the maximum collector power of [2]
20 W
At the maximum collector power of 150 watts, a minimum air flow of 20 cfm
Note [1]
5 MHz
Note 5: Useful gain and power output exists below 2000 mc and above 4000 mc and
Note [2]
2000 MHz
Note 5: Useful gain and power output exists below 2000 mc and above 4000 mc and
Note [3]
4000 MHz
Note 5: Useful gain and power output exists below 2000 mc and above 4000 mc and
Note [1]
6 MHz
Note 6: This gain is obtained over the 2. 0 to 4. 0 kmc bandwidth at the power level
Note [2]
2 MHz
Note 6: This gain is obtained over the 2. 0 to 4. 0 kmc bandwidth at the power level
Note [3]
0 MHz
Note 6: This gain is obtained over the 2. 0 to 4. 0 kmc bandwidth at the power level
Note [4]
4 MHz
Note 6: This gain is obtained over the 2. 0 to 4. 0 kmc bandwidth at the power level
Note [5]
0 MHz
Note 6: This gain is obtained over the 2. 0 to 4. 0 kmc bandwidth at the power level
( [1]
1 V
(1) Heater warm up of 2 minutes before applying high voltage is recommended.
( [2]
2 V
(1) Heater warm up of 2 minutes before applying high voltage is recommended.
/
1
/ 1 watt input