Data set 01
1958 Compagnie General
Published operating points and test conditions from this source.
SECTION 1
Rectifier
Application
Application
High-voltage rectifier / radar modulator diode
Characteristics
Warmup time
40 s
Rectifier - Half Wave ·Rectifier
F5004
Indirectly heated high-voltage high-vacuum rectifier for airborne, radar-modulator, and high-frequency supplies. Its specialized construction supports low-current high-voltage military and professional equipment.
Directly heatedCold cathodeCommon cathodeDissimilar
- Sections
- 1
- Base
- -
- Socket code
- SEPTAR5
- Base pins
- -
- Nominal heater
- 6.3 V / 1.1 A
Description
High-voltage high-vacuum single-anode rectifier for airborne, radar-modulator and high-frequency power-supply service.
Socket description
Septar 5-contact transmitting-tube base family
General specifications
Tube and section characteristics
Properties common to every published source and operating point.
Heater and base
- Base
- -
- Socket code
- SEPTAR5
- Base pins
- -
- Nominal heater voltage
- 6.3 V
- Nominal heater current
- 1.1 A
- Parallel heater voltage
- -
- Parallel heater current
- -
- Series capable
- No
Terminal pinout
Electrical assignments shared by every tube using this base designation.
No verified pinout is recorded for this base designation.
Section ratings
1 physical section, each with unique specifications.
Section 1
Rectifier
X-ray radiationInterelectrode capacitances
- Rectifier nominal output current
- 50 mA
- Rectifier warm-up time
- 40 s
Published source values promoted where applicable; additional electrical, RF, pulse and cooling data retained as parameters.
Source-dependent data
Operating conditions by source
Each block preserves the test conditions and published values from one reference. Values from different sources are intentionally kept separate.