Tube cross-reference
EL95 alternatives, equivalents, and replacements
Review exact electrical variations and directional substitutions recorded for the EL95 power - pentode single (not beam) (under 10w). Compare core specifications and verify every restriction before using a replacement.
Exact variations of EL95
These designations belong to the same electrical variation group. Their names may differ because of international standards, manufacturing tolerances, or materials, but they are recorded as electrically equivalent—not merely substitutes.
6DL5 Power - Pentode Single (NOT beam) (under 10W)
- Base
- Not recorded
- Socket
- B7G
- Base pins
- 7
- Sections
- 1
- Heater voltage
- 6.3 V
- Heater current
- 0.2 A
Replacement tubes for EL95
The following tubes are recorded as possible replacements for EL95. This direction does not establish that EL95 can replace them.
Power - Pentode Single (NOT beam) (under 10W)
The database records 6DL5 as a possible replacement forEL95.
No special restrictions are recorded for this substitution.
| Specification | Original tube | Replacement |
|---|---|---|
| Tube type | Power - Pentode Single (NOT beam) (under 10W) | Power - Pentode Single (NOT beam) (under 10W) |
| Construction | Pentode | Pentode |
| Base | Not recorded | Not recorded |
| Socket | B7G | B7G |
| Base pins | 7 | 7 |
| Sections | 1 | 1 |
| Heater voltage | 6.3 V | 6.3 V |
| Heater current | 0.2 A | 0.2 A |
Where EL95 can be used as the replacement
In these recorded relationships, EL95 is the replacement tube. The listed original tubes are not automatically suitable as replacements for EL95.
Power - Pentode Single (NOT beam) (under 10W)
The database records EL95 as a possible replacement for6DL5.
No special restrictions are recorded for this substitution.
| Specification | EL95 replacement | Original tube |
|---|---|---|
| Tube type | Power - Pentode Single (NOT beam) (under 10W) | Power - Pentode Single (NOT beam) (under 10W) |
| Construction | Pentode | Pentode |
| Base | Not recorded | Not recorded |
| Socket | B7G | B7G |
| Base pins | 7 | 7 |
| Sections | 1 | 1 |
| Heater voltage | 6.3 V | 6.3 V |
| Heater current | 0.2 A | 0.2 A |
Verify before substituting
Matching a base or heater voltage is not enough to prove that two tubes are interchangeable. Check pin connections, heater current, maximum ratings, bias requirements, warm-up behavior, and the equipment manufacturer’s service documentation before making a substitution.
View the complete EL95 specifications →