Skip to main content

Power - Pentode Single (NOT beam) (under 10W) ·Pentode

EL32

Low-current-heater output pentode for AC/DC and automobile-radio audio stages.

Directly heatedCold cathodeCommon cathodeDissimilar
Sections
1
Base
Octal
Socket code
IO
Base pins
8
Nominal heater
6.3 V / 200 mA

Description

Output pentode with 200 mA heater for AC/DC and car-radio audio output service. Published heater, characteristics, ratings and application information were read from the supplied Mullard sheet.

Socket description

International Octal

General specifications

Tube and section characteristics

Properties common to every published source and operating point.

Heater and base

Base
Octal
Socket code
IO
Base pins
8
Nominal heater voltage
6.3 V
Nominal heater current
200 mA
Parallel heater voltage
-
Parallel heater current
-
Series capable
No

Octal - Terminal pinout

Electrical assignments shared by every tube using this base designation.

No verified pinout is recorded for this base designation.

Section ratings

1 physical section, each with unique specifications.

Section 1

Pentode

X-ray radiationInterelectrode capacitances
Plate resistance
70000 Ω
Transconductance
0.0028 S
Max plate voltage
250 V
Max screen voltage
250 V
Max plate dissipation
8 W
Max screen dissipation
1.6 W
Max cathode current
42 mA

Published source values promoted where applicable; additional values retained as parameters.

Source-dependent data

Operating conditions by source

Each block preserves the test conditions and published values from one reference. Values from different sources are intentionally kept separate.

Data set 01

1951 Mullard Valve and Service Manual

Published operating points and test conditions from this source.

SECTION 1

Pentode

Application

  • Service

    Audio power output

  • Triode-connected operation

    Published

    TriodeConnection

Data set 02

1963 Mullard

Published operating points and test conditions from this source.

SECTION 1

Pentode

Other

  • Anode current

    32 mA

    ClassA

  • Screen current

    5 mA

    ClassA

  • Load resistance

    8000 ohm

    ClassA

  • Output power

    3.6 W

    ClassA

  • Push-pull output power

    7 W

    PushPull; TwoTubes