Tube cross-reference
EF94 alternatives, equivalents, and replacements
Review exact electrical variations and directional substitutions recorded for the EF94 voltage pentode - sharp cutoff (single). Compare core specifications and verify every restriction before using a replacement.
Replacement tubes for EF94
The following tubes are recorded as possible replacements for EF94. This direction does not establish that EF94 can replace them.
Voltage Pentode - Sharp Cutoff (single)
The database records 6AU6 as a possible replacement forEF94.
No special restrictions are recorded for this substitution.
| Specification | Original tube | Replacement |
|---|---|---|
| Tube type | Voltage Pentode - Sharp Cutoff (single) | Voltage Pentode - Sharp Cutoff (single) |
| Construction | Pentode | Pentode |
| Base | Not recorded | 7BK |
| Socket | B7G | B7G |
| Base pins | 7 | 7 |
| Sections | 1 | 1 |
| Heater voltage | 6.3 V | 6.3 V |
| Heater current | 0.3 A | 0.3 A |
Where EF94 can be used as the replacement
In these recorded relationships, EF94 is the replacement tube. The listed original tubes are not automatically suitable as replacements for EF94.
Voltage Pentode - Sharp Cutoff (single)
The database records EF94 as a possible replacement for6136.
No special restrictions are recorded for this substitution.
| Specification | EF94 replacement | Original tube |
|---|---|---|
| Tube type | Voltage Pentode - Sharp Cutoff (single) | Voltage Pentode - Sharp Cutoff (single) |
| Construction | Pentode | Pentode |
| Base | Not recorded | E7-1 |
| Socket | B7G | B7G |
| Base pins | 7 | 7 |
| Sections | 1 | 1 |
| Heater voltage | 6.3 V | 6.3 V |
| Heater current | 0.3 A | 0.3 A |
Voltage Pentode - Sharp Cutoff (single)
The database records EF94 as a possible replacement for6AU6.
No special restrictions are recorded for this substitution.
| Specification | EF94 replacement | Original tube |
|---|---|---|
| Tube type | Voltage Pentode - Sharp Cutoff (single) | Voltage Pentode - Sharp Cutoff (single) |
| Construction | Pentode | Pentode |
| Base | Not recorded | 7BK |
| Socket | B7G | B7G |
| Base pins | 7 | 7 |
| Sections | 1 | 1 |
| Heater voltage | 6.3 V | 6.3 V |
| Heater current | 0.3 A | 0.3 A |
Voltage Pentode - Sharp Cutoff (single)
The database records EF94 as a possible replacement for7543.
No special restrictions are recorded for this substitution.
| Specification | EF94 replacement | Original tube |
|---|---|---|
| Tube type | Voltage Pentode - Sharp Cutoff (single) | Voltage Pentode - Sharp Cutoff (single) |
| Construction | Pentode | Pentode |
| Base | Not recorded | 76K |
| Socket | B7G | B7G |
| Base pins | 7 | 7 |
| Sections | 1 | 1 |
| Heater voltage | 6.3 V | 6.3 V |
| Heater current | 0.3 A | 0.3 A |
Verify before substituting
Matching a base or heater voltage is not enough to prove that two tubes are interchangeable. Check pin connections, heater current, maximum ratings, bias requirements, warm-up behavior, and the equipment manufacturer’s service documentation before making a substitution.
View the complete EF94 specifications →