Tube cross-reference
EF734 alternatives, equivalents, and replacements
Review exact electrical variations and directional substitutions recorded for the EF734 voltage pentode - high frequency (single). Compare core specifications and verify every restriction before using a replacement.
Replacement tubes for EF734
The following tubes are recorded as possible replacements for EF734. This direction does not establish that EF734 can replace them.
Voltage Pentode - Sharp Cutoff (single)
The database records 6205 as a possible replacement forEF734.
No special restrictions are recorded for this substitution.
| Specification | Original tube | Replacement |
|---|---|---|
| Tube type | Voltage Pentode - High Frequency (single) | Voltage Pentode - Sharp Cutoff (single) |
| Construction | Pentode | Pentode |
| Base | B8D/F | 8DC |
| Socket | WIRE8 | IO |
| Base pins | 8 | 8 |
| Sections | 1 | 1 |
| Heater voltage | 6.3 V | 6.3 V |
| Heater current | 0.15 A | 0.15 A |
Where EF734 can be used as the replacement
In these recorded relationships, EF734 is the replacement tube. The listed original tubes are not automatically suitable as replacements for EF734.
Voltage Pentode - Sharp Cutoff (single)
The database records EF734 as a possible replacement for6205.
No special restrictions are recorded for this substitution.
| Specification | EF734 replacement | Original tube |
|---|---|---|
| Tube type | Voltage Pentode - High Frequency (single) | Voltage Pentode - Sharp Cutoff (single) |
| Construction | Pentode | Pentode |
| Base | B8D/F | 8DC |
| Socket | WIRE8 | IO |
| Base pins | 8 | 8 |
| Sections | 1 | 1 |
| Heater voltage | 6.3 V | 6.3 V |
| Heater current | 0.15 A | 0.15 A |
Verify before substituting
Matching a base or heater voltage is not enough to prove that two tubes are interchangeable. Check pin connections, heater current, maximum ratings, bias requirements, warm-up behavior, and the equipment manufacturer’s service documentation before making a substitution.
View the complete EF734 specifications →