Data set 01
1958 Mullard Receiving Tubes
Published operating points and test conditions from this source.
Pentode
Characteristic
Heater Voltage
6.3 V
Heater Current
150 mA
Voltage Pentode - High Frequency (single) ·Pentode
Subminiature high-slope RF pentode usable in pentode or triode connection for flexible high-frequency small-signal amplification.
The Mullard EF72 is a subminiature high-slope RF pentode suitable for pentode or triode connection.
Subminiature all-glass 8-wire lead family
General specifications
Properties common to every published source and operating point.
Electrical assignments shared by every tube using this base designation.
No verified pinout is recorded for this base designation.
1 physical section, each with unique specifications.
Section 1
Published ratings and characteristics promoted from the supplied Brimar source.
Source-dependent data
Each block preserves the test conditions and published values from one reference. Values from different sources are intentionally kept separate.
Data set 01
Published operating points and test conditions from this source.
Heater Voltage
6.3 V
Heater Current
150 mA
Data set 02
Published operating points and test conditions from this source.
Heater Voltage
6.3 V
Heater Current
150 mA
Plate Voltage
100 V
Screen Voltage
100 V
Plate Current
7 mA
Screen Current
2.2 mA
Transconductance
5000 uS
Plate Resistance
250000 ohm
Transconductance
6800 uS
TriodeConnection
Plate Resistance
53000 ohm
TriodeConnection
Amplification Factor
36 ratio
TriodeConnection
Maximum Plate Voltage
175 V
Maximum Screen Voltage
175 V
Maximum Plate Dissipation
0.8 W
Maximum Screen Dissipation
0.3 W
Maximum Plate Supply Voltage
300 V
Maximum Screen Supply Voltage
300 V