Voltage Pentode ·Pentode
Pentode designed for RF, IF, and AF amplification, with documented triode-connected operation as well. Its broad signal-amplifier capability spans several receiver and audio-frequency stages rather than a single specialized function.
RF/IF/AF pentode with triode-connected operation.
General specifications
Properties common to every published source and operating point.
Electrical assignments shared by every tube using this base designation.
No verified pinout is recorded for this base designation.
1 physical section, each with unique specifications.
Section 1
Published ratings and characteristics promoted from the approved German source.
Source-dependent data
Each block preserves the test conditions and published values from one reference. Values from different sources are intentionally kept separate.
Data set 01
Published operating points and test conditions from this source.
HeaterVoltageNominal
6.3 V
Nominal
HeaterCurrentNominal
200 mA
Nominal
Maximum Plate Voltage
250 V
Maximum Screen Voltage
250 V
Maximum Plate Dissipation
2 W
Maximum Screen Dissipation
0.5 W
Maximum Cathode Current
20 mA
Transconductance
2200 µS
Typical
Plate Resistance
800000 ohm
Typical
Data set 02
Published operating points and test conditions from this source.
Triode-connected operation
Published
TriodeConnection
Data set 03
Published operating points and test conditions from this source.
Heater voltage
6.3 V
Heater current
200 mA
Typical plate voltage
250 V
Typical screen voltage
100 V
Typical grid voltage
-2 V
Typical plate current
3 mA
Typical screen current
1 mA
Transconductance
2100 uS
Plate resistance
2 Mohm
Screen-grid amplification factor
25
Plate capacitance
6.5 pF
Grid input capacitance
6.5 pF
Plate-grid capacitance maximum
0.002 pF
Grid-heater capacitance maximum
0.03 pF
Triode-connected maximum plate voltage
200 V
TriodeConnection