Skip to main content

Specialized - Photo Tube ·LightSource

EDN10

Dual xenon stroboscopic tube containing two independent EN55 flash assemblies for interlaced operation to roughly 800 flashes per second.

Directly heatedCold cathodeCommon cathodeDissimilarSpecialized
Sections
1
Base
-
Socket code
-
Base pins
-
Nominal heater
-

Description

The Ferranti EDN10 contains two independent EN55 xenon cold-cathode flash assemblies for interlaced stroboscopic operation up to about 800 flashes per second.

General specifications

Tube and section characteristics

Properties common to every published source and operating point.

Heater and base

Base
-
Socket code
-
Base pins
-
Nominal heater voltage
-
Nominal heater current
-
Parallel heater voltage
-
Parallel heater current
-
Series capable
No

Terminal pinout

Electrical assignments shared by every tube using this base designation.

No verified pinout is recorded for this base designation.

Section ratings

1 physical section, each with unique specifications.

Section 1

LightSource

X-ray radiationInterelectrode capacitances
Max plate voltage
1000 V

Representative of two identical EN55 flash sections.

Source-dependent data

Operating conditions by source

Each block preserves the test conditions and published values from one reference. Values from different sources are intentionally kept separate.

Data set 01

1963 Ferranti

Published operating points and test conditions from this source.

SECTION 1

LightSource

Other

  • Maximum Static Anode Voltage

    1000 V

    EachSection

  • Maximum Working Anode Voltage

    900 V

    EachSection

  • Maximum Dissipation

    20 W

    EachSection

  • Maximum Discharge Capacitor

    6 uF

    EachSection

  • Minimum Charging Resistor

    8000 ohm

    12-150Hz; EachSection

  • Minimum Charging Resistor

    11000 ohm

    150-400Hz; EachSection

  • Maximum Operating Frequency

    400 Hz

    EachSection

Characteristics

  • Minimum Working Anode Voltage

    700 V

    EachSection

  • Trigger Voltage

    3 kV

    2-4kV PeakPulse; EachSection

  • Typical Peak Luminous Intensity

    140000 cd

    Va=900V; C=6uF; EachSection

  • Typical Flash Duration

    27.5 us

    25-30us; EachSection