Data set 01
1959 Telefunken
Published operating points and test conditions from this source.
SECTION 1
Triode
Characteristic
Heater Voltage
6.3 V
Heater Current
650 mA
MaximumOperatingFrequency
1000 MHz
GroundedGrid
Power - Triode Single (under 10W) ·Triode
EC8010
Power-capable triode intended for amplifier or driver service. Manufacturer data support moderate-current operation and useful dissipation, but do not justify assignment to the large transmitting or specialized regulator families.
Directly heatedCold cathodeCommon cathodeDissimilar
- Sections
- 1
- Base
- -
- Socket code
- B9A
- Base pins
- 9
- Nominal heater
- 6.3 V / 650 mA
Description
Special-quality UHF power triode for grounded-grid amplifiers and oscillators to about 1000 MHz; equivalent to 8556.
Socket description
Small-button Noval 9-contact
General specifications
Tube and section characteristics
Properties common to every published source and operating point.
Heater and base
- Base
- -
- Socket code
- B9A
- Base pins
- 9
- Nominal heater voltage
- 6.3 V
- Nominal heater current
- 650 mA
- Parallel heater voltage
- -
- Parallel heater current
- -
- Series capable
- No
Terminal pinout
Electrical assignments shared by every tube using this base designation.
No verified pinout is recorded for this base designation.
Section ratings
1 physical section, each with unique specifications.
Section 1
Triode
X-ray radiationInterelectrode capacitances
- Transconductance
- 0.028 S
- Amplification factor
- 60
- Max plate voltage
- 400 V
- Max plate dissipation
- 7 W
Published Telefunken ratings and characteristics promoted from the supplied source.
Source-dependent data
Operating conditions by source
Each block preserves the test conditions and published values from one reference. Values from different sources are intentionally kept separate.
Data set 02
1999 Philips E-Z
Published operating points and test conditions from this source.
SECTION 1
Triode
Characteristic
Anode-grid capacitance
0.09 pF
Grid-cathode-heater capacitance
7.5 pF