Data set 01
1959 Telefunken
Published operating points and test conditions from this source.
SECTION 1
Diode
Characteristic
Heater Voltage
6.3 V
Heater Current
200 mA
Voltage - Triode (with diode, heptode or hexode) ·Diode-Diode-Triode
EBC11
Double-diode triode combining receiver detection and control-voltage rectification with audio-frequency voltage amplification. Paired diodes handle detector and AVC functions while the triode amplifies the recovered audio signal.
Directly heatedCold cathodeCommon cathodeDissimilar
- Sections
- 3
- Base
- -
- Socket code
- P8A
- Base pins
- -
- Nominal heater
- 6.3 V / 200 mA
Description
Double-diode triode for detector, AVC, and audio-frequency amplifier service.
Socket description
European 8-pin side-contact base
General specifications
Tube and section characteristics
Properties common to every published source and operating point.
Heater and base
- Base
- -
- Socket code
- P8A
- Base pins
- -
- Nominal heater voltage
- 6.3 V
- Nominal heater current
- 200 mA
- Parallel heater voltage
- -
- Parallel heater current
- -
- Series capable
- No
Terminal pinout
Electrical assignments shared by every tube using this base designation.
No verified pinout is recorded for this base designation.
Section ratings
3 physical sections, each with unique specifications.
Section 1
Diode
X-ray radiationInterelectrode capacitances
No fixed ratings are recorded for this section.
Published Telefunken ratings and characteristics promoted from the supplied source.
Section 2
Diode
X-ray radiationInterelectrode capacitances
- Max plate voltage
- 200 V
- Rectifier nominal output current
- 0.8 mA
Published Telefunken ratings and characteristics promoted from the supplied source.
Section 3
Triode
X-ray radiationInterelectrode capacitances
- Plate resistance
- 10000 Ω
- Transconductance
- 0.0022 S
- Amplification factor
- 25
- Max plate voltage
- 300 V
- Max plate dissipation
- 1.5 W
- Max cathode current
- 10 mA
Published Telefunken ratings and characteristics promoted from the supplied source.
Source-dependent data
Operating conditions by source
Each block preserves the test conditions and published values from one reference. Values from different sources are intentionally kept separate.
Data set 02
1999 Philips E-Z
Published operating points and test conditions from this source.
SECTION 2
Diode
Other
Maximum diode current
0.8 mA
Maximum diode peak voltage
200 V
SECTION 3
Triode
Characteristics
Heater voltage
6.3 V
Heater current
200 mA
Typical plate voltage
250 V
Transconductance
2200 uS
Amplification factor
25
Plate resistance
11500 ohm
Other
Maximum plate voltage
300 V
Maximum plate dissipation
1.5 W