Data set 01
1959 Telefunken
Published operating points and test conditions from this source.
SECTION 1
Diode
Characteristic
Heater Voltage
6.3 V
Heater Current
200 mA
Diode (NOT rectifier) ·Diode-Diode
EB11
Indirectly heated twin diode with two separate cathodes, intended for detector and rectifier applications in receiving equipment.
Directly heatedCold cathodeCommon cathodeDissimilar
- Sections
- 2
- Base
- -
- Socket code
- P8A
- Base pins
- 8
- Nominal heater
- 6.3 V / 200 mA
Description
Indirectly heated twin diode with two cathodes.
Socket description
European 8-pin side-contact base
General specifications
Tube and section characteristics
Properties common to every published source and operating point.
Heater and base
- Base
- -
- Socket code
- P8A
- Base pins
- 8
- Nominal heater voltage
- 6.3 V
- Nominal heater current
- 200 mA
- Parallel heater voltage
- -
- Parallel heater current
- -
- Series capable
- No
Terminal pinout
Electrical assignments shared by every tube using this base designation.
No verified pinout is recorded for this base designation.
Section ratings
2 physical sections, each with unique specifications.
Section 1
Diode
X-ray radiationInterelectrode capacitances
- Max plate voltage
- 200 V
- Rectifier peak inverse voltage
- 200 V
- Rectifier nominal output current
- 0.8 mA
Published Telefunken ratings and characteristics promoted from the supplied source.
Section 2
Diode
X-ray radiationInterelectrode capacitances
No fixed ratings are recorded for this section.
Second physical diode section added in approved section-structure reconciliation.
Source-dependent data
Operating conditions by source
Each block preserves the test conditions and published values from one reference. Values from different sources are intentionally kept separate.
Data set 02
1999 Philips E-Z
Published operating points and test conditions from this source.
SECTION 1
Diode
Characteristics
Heater voltage
6.3 V
Heater current
200 mA
Other
Maximum diode voltage
200 V
Maximum diode current
0.8 mA
Capacitance
Diode 1 to cathode capacitance
3.3 pF
Diode 2 to cathode capacitance
1 pF