Data set 01
1958 Compagnie General
Published operating points and test conditions from this source.
SECTION 1
Triode
Other
Maximum frequency
60 MHz
Anode current maximum
700 mA
Application
Application
HF/AF power amplifier or oscillator
Power - Triode (over 1000V 100W) ·Triode
E1200
Naturally cooled transmitting power triode for RF and audio-frequency amplification and power-oscillator service. Rated for approximately 500 W plate dissipation and 3.5 kV plate voltage, with useful operation to roughly 60 MHz.
Directly heatedCold cathodeCommon cathodeDissimilar
- Sections
- 1
- Base
- -
- Socket code
- -
- Base pins
- -
- Nominal heater
- 12 V / 9.5 A
Description
Naturally cooled transmitting power triode for HF/AF amplification and power-oscillator service.
General specifications
Tube and section characteristics
Properties common to every published source and operating point.
Heater and base
- Base
- -
- Socket code
- -
- Base pins
- -
- Nominal heater voltage
- 12 V
- Nominal heater current
- 9.5 A
- Parallel heater voltage
- -
- Parallel heater current
- -
- Series capable
- No
Terminal pinout
Electrical assignments shared by every tube using this base designation.
No verified pinout is recorded for this base designation.
Section ratings
1 physical section, each with unique specifications.
Section 1
Triode
X-ray radiationInterelectrode capacitances
- Max plate voltage
- 3500 V
- Max plate dissipation
- 500 W
- Max cathode current
- 700 mA
Published source ratings and characteristics promoted where applicable; additional data retained as parameters.
Source-dependent data
Operating conditions by source
Each block preserves the test conditions and published values from one reference. Values from different sources are intentionally kept separate.