Alternatives & variations Download PDF datasheet

E

Philips high-vacuum receiving triode for detector, RF/AF amplification, and low-power output service.

Directly heatedCold cathodeCommon cathodeDissimilar

Sections: 1
Base: A
Socket code: -
Base pins: 4
Nominal heater: 4 V / 700 mA

Description

Philips high-vacuum receiving triode for detector, RF/AF amplification, and output service. The record captures the published heater data, principal electrical characteristics, ratings, and other section-specific values from the supplied datasheet.

General specifications

Tube and section characteristics

Properties common to every published source and operating point.

Heater and base

Base: A
Socket code: -
Base pins: 4
Nominal heater voltage: 4 V
Nominal heater current: 700 mA
Parallel heater voltage: -
Parallel heater current: -
Series capable: No

A - Terminal pinout

Electrical assignments shared by every tube using this base designation.

No verified pinout is recorded for this base designation.

Section ratings

1 physical section, each with unique specifications.

Section 1

Triode

X-ray radiationInterelectrode capacitances

Plate resistance: 25000 Ω
Transconductance: 0.0004 S
Amplification factor: 10
Max plate voltage: 200 V

Published section data promoted where applicable.

Source-dependent data

Operating conditions by source

Each block preserves the test conditions and published values from one reference. Values from different sources are intentionally kept separate.

Data set 01

1999 Philips E-Z

Published operating points and test conditions from this source.

SECTION 1

Triode

Other

Anodespanning V=
50 V
Published datasheet value
Maximum plate voltage
200 V
Promoted published datasheet value

Characteristic

Plate resistance
25000 Ω
Promoted published datasheet value
Transconductance
400 µS
Promoted published datasheet value
Amplification factor
10
Promoted published datasheet value