Alternatives & variations Download PDF datasheet

DX184

Amperex tunable reflex klystron intended for millimeter-wave oscillator service, providing mechanically tunable high-frequency output.

Directly heatedCold cathodeCommon cathodeDissimilarSpecialized

Sections: 1
Base: -
Socket code: -
Base pins: -
Nominal heater: 6.3 V / 800 mA

Description

DX184 is listed in the supplied Amperex material as a reflex tunable millimeter-wave klystron. Published ratings and characteristics were captured from the supplied table.

General specifications

Tube and section characteristics

Properties common to every published source and operating point.

Heater and base

Base: -
Socket code: -
Base pins: -
Nominal heater voltage: 6.3 V
Nominal heater current: 800 mA
Parallel heater voltage: -
Parallel heater current: -
Series capable: No

Terminal pinout

Electrical assignments shared by every tube using this base designation.

No verified pinout is recorded for this base designation.

Section ratings

1 physical section, each with unique specifications.

Section 1

Klystron

X-ray radiationInterelectrode capacitances

No fixed ratings are recorded for this section.

Published ratings, characteristics and special-purpose operating data reviewed.

Source-dependent data

Operating conditions by source

Each block preserves the test conditions and published values from one reference. Values from different sources are intentionally kept separate.

Data set 01

1963 Amperex Condensed

Published operating points and test conditions from this source.

SECTION 1

Klystron

Characteristic

Heater voltage
6.3 V
Published rating
Heater current
800 mA
Published rating
Frequency range minimum
31000 MHz
ReflexKlystron
Frequency range maximum
36000 MHz
ReflexKlystron
Electronic tuning range
60 MHz
ReflexKlystron

Other

Beam voltage
2250 V
ReflexKlystron
Reflector voltage minimum
100 V
ReflexKlystron
Reflector voltage maximum
500 V
ReflexKlystron
Beam current
15 mA
ReflexKlystron
Power output
0.1 W
ReflexKlystron