Tube cross-reference
DM71 alternatives, equivalents, and replacements
Review exact electrical variations and directional substitutions recorded for the DM71 tuning indicator. Compare core specifications and verify every restriction before using a replacement.
Exact variations of DM71
These designations belong to the same electrical variation group. Their names may differ because of international standards, manufacturing tolerances, or materials, but they are recorded as electrically equivalent—not merely substitutes.
1N3 Tuning Indicator
- Base
- Not recorded
- Socket
- Not recorded
- Base pins
- 8
- Sections
- 1
- Heater voltage
- 1.4 V
- Heater current
- 0.025 A
Replacement tubes for DM71
The following tubes are recorded as possible replacements for DM71. This direction does not establish that DM71 can replace them.
Tuning Indicator
The database records 1N3 as a possible replacement forDM71.
No special restrictions are recorded for this substitution.
| Specification | Original tube | Replacement |
|---|---|---|
| Tube type | Tuning Indicator | Tuning Indicator |
| Construction | TuningIndicator | TuningIndicator |
| Base | Subminiature | Not recorded |
| Socket | Not recorded | Not recorded |
| Base pins | 8 | 8 |
| Sections | 1 | 1 |
| Heater voltage | 1.4 V | 1.4 V |
| Heater current | 0.025 A | 0.025 A |
Where DM71 can be used as the replacement
In these recorded relationships, DM71 is the replacement tube. The listed original tubes are not automatically suitable as replacements for DM71.
Tuning Indicator
The database records DM71 as a possible replacement for1M3.
No special restrictions are recorded for this substitution.
| Specification | DM71 replacement | Original tube |
|---|---|---|
| Tube type | Tuning Indicator | Tuning Indicator |
| Construction | TuningIndicator | TuningIndicator |
| Base | Subminiature | SDN |
| Socket | Not recorded | Not recorded |
| Base pins | 8 | 8 |
| Sections | 1 | 1 |
| Heater voltage | 1.4 V | 1.4 V |
| Heater current | 0.025 A | 0.025 A |
Tuning Indicator
The database records DM71 as a possible replacement for1N3.
No special restrictions are recorded for this substitution.
| Specification | DM71 replacement | Original tube |
|---|---|---|
| Tube type | Tuning Indicator | Tuning Indicator |
| Construction | TuningIndicator | TuningIndicator |
| Base | Subminiature | Not recorded |
| Socket | Not recorded | Not recorded |
| Base pins | 8 | 8 |
| Sections | 1 | 1 |
| Heater voltage | 1.4 V | 1.4 V |
| Heater current | 0.025 A | 0.025 A |
Verify before substituting
Matching a base or heater voltage is not enough to prove that two tubes are interchangeable. Check pin connections, heater current, maximum ratings, bias requirements, warm-up behavior, and the equipment manufacturer’s service documentation before making a substitution.
View the complete DM71 specifications →