Tube cross-reference
DL67 alternatives, equivalents, and replacements
Review exact electrical variations and directional substitutions recorded for the DL67 power - pentode single (not beam) (under 10w). Compare core specifications and verify every restriction before using a replacement.
Exact variations of DL67
These designations belong to the same electrical variation group. Their names may differ because of international standards, manufacturing tolerances, or materials, but they are recorded as electrically equivalent—not merely substitutes.
6007 Power - Pentode Single (NOT beam) (under 10W)
- Base
- 512-AX
- Socket
- B8D
- Base pins
- 5
- Sections
- 1
- Heater voltage
- 1.25 V
- Heater current
- 0.0133 A
Replacement tubes for DL67
The following tubes are recorded as possible replacements for DL67. This direction does not establish that DL67 can replace them.
Power - Pentode Single (NOT beam) (under 10W)
The database records 5913 as a possible replacement forDL67.
No special restrictions are recorded for this substitution.
| Specification | Original tube | Replacement |
|---|---|---|
| Tube type | Power - Pentode Single (NOT beam) (under 10W) | Power - Pentode Single (NOT beam) (under 10W) |
| Construction | Pentode | Pentode |
| Base | Subminiature | Not recorded |
| Socket | WIRE8 | B9A |
| Base pins | 8 | 9 |
| Sections | 1 | 1 |
| Heater voltage | 1.25 V | 1.25 V |
| Heater current | 0.0133 A | 0.0133 A |
Power - Pentode Single (NOT beam) (under 10W)
The database records 6007 as a possible replacement forDL67.
No special restrictions are recorded for this substitution.
| Specification | Original tube | Replacement |
|---|---|---|
| Tube type | Power - Pentode Single (NOT beam) (under 10W) | Power - Pentode Single (NOT beam) (under 10W) |
| Construction | Pentode | Pentode |
| Base | Subminiature | 512-AX |
| Socket | WIRE8 | B8D |
| Base pins | 8 | 5 |
| Sections | 1 | 1 |
| Heater voltage | 1.25 V | 1.25 V |
| Heater current | 0.0133 A | 0.0133 A |
Where DL67 can be used as the replacement
In these recorded relationships, DL67 is the replacement tube. The listed original tubes are not automatically suitable as replacements for DL67.
Power - Pentode Single (NOT beam) (under 10W)
The database records DL67 as a possible replacement for5913.
No special restrictions are recorded for this substitution.
| Specification | DL67 replacement | Original tube |
|---|---|---|
| Tube type | Power - Pentode Single (NOT beam) (under 10W) | Power - Pentode Single (NOT beam) (under 10W) |
| Construction | Pentode | Pentode |
| Base | Subminiature | Not recorded |
| Socket | WIRE8 | B9A |
| Base pins | 8 | 9 |
| Sections | 1 | 1 |
| Heater voltage | 1.25 V | 1.25 V |
| Heater current | 0.0133 A | 0.0133 A |
Power - Pentode Single (NOT beam) (under 10W)
The database records DL67 as a possible replacement for6007.
No special restrictions are recorded for this substitution.
| Specification | DL67 replacement | Original tube |
|---|---|---|
| Tube type | Power - Pentode Single (NOT beam) (under 10W) | Power - Pentode Single (NOT beam) (under 10W) |
| Construction | Pentode | Pentode |
| Base | Subminiature | 512-AX |
| Socket | WIRE8 | B8D |
| Base pins | 8 | 5 |
| Sections | 1 | 1 |
| Heater voltage | 1.25 V | 1.25 V |
| Heater current | 0.0133 A | 0.0133 A |
Verify before substituting
Matching a base or heater voltage is not enough to prove that two tubes are interchangeable. Check pin connections, heater current, maximum ratings, bias requirements, warm-up behavior, and the equipment manufacturer’s service documentation before making a substitution.
View the complete DL67 specifications →