Tube cross-reference
DK91 alternatives, equivalents, and replacements
Review exact electrical variations and directional substitutions recorded for the DK91 voltage pentode or tetrode (under 100v). Compare core specifications and verify every restriction before using a replacement.
Exact variations of DK91
These designations belong to the same electrical variation group. Their names may differ because of international standards, manufacturing tolerances, or materials, but they are recorded as electrically equivalent—not merely substitutes.
1R5 Voltage Pentode or Tetrode (under 100V)
- Base
- 7AT
- Socket
- B7G
- Base pins
- 7
- Sections
- 1
- Heater voltage
- 1.4 V
- Heater current
- 0.05 A
Replacement tubes for DK91
The following tubes are recorded as possible replacements for DK91. This direction does not establish that DK91 can replace them.
Voltage Pentode or Tetrode (under 100V)
The database records 1R5 as a possible replacement forDK91.
No special restrictions are recorded for this substitution.
| Specification | Original tube | Replacement |
|---|---|---|
| Tube type | Voltage Pentode or Tetrode (under 100V) | Voltage Pentode or Tetrode (under 100V) |
| Construction | Heptode | Heptode |
| Base | B7G | 7AT |
| Socket | B7G | B7G |
| Base pins | 7 | 7 |
| Sections | 1 | 1 |
| Heater voltage | 1.4 V | 1.4 V |
| Heater current | 0.05 A | 0.05 A |
Where DK91 can be used as the replacement
In these recorded relationships, DK91 is the replacement tube. The listed original tubes are not automatically suitable as replacements for DK91.
Voltage Pentode or Tetrode (under 100V)
The database records DK91 as a possible replacement for1R5.
No special restrictions are recorded for this substitution.
| Specification | DK91 replacement | Original tube |
|---|---|---|
| Tube type | Voltage Pentode or Tetrode (under 100V) | Voltage Pentode or Tetrode (under 100V) |
| Construction | Heptode | Heptode |
| Base | B7G | 7AT |
| Socket | B7G | B7G |
| Base pins | 7 | 7 |
| Sections | 1 | 1 |
| Heater voltage | 1.4 V | 1.4 V |
| Heater current | 0.05 A | 0.05 A |
Verify before substituting
Matching a base or heater voltage is not enough to prove that two tubes are interchangeable. Check pin connections, heater current, maximum ratings, bias requirements, warm-up behavior, and the equipment manufacturer’s service documentation before making a substitution.
View the complete DK91 specifications →