Skip to main content

Voltage - Triode (single) ·Triode

DC41W

German combined diode-triode receiving valve with published operating data and limiting ratings for detector and amplifier service.

Directly heatedCold cathodeCommon cathodeDissimilar
Sections
1
Base
-
Socket code
-
Base pins
-
Nominal heater
1.2 V / 25 mA

Description

DC41W: combined diode-triode valve with published operating data and limiting ratings. The approved German-language datasheet was translated and interpreted by technical meaning.

General specifications

Tube and section characteristics

Properties common to every published source and operating point.

Heater and base

Base
-
Socket code
-
Base pins
-
Nominal heater voltage
1.2 V
Nominal heater current
25 mA
Parallel heater voltage
-
Parallel heater current
-
Series capable
No

Terminal pinout

Electrical assignments shared by every tube using this base designation.

No verified pinout is recorded for this base designation.

Section ratings

1 physical section, each with unique specifications.

Section 1

Triode

X-ray radiationInterelectrode capacitances
Plate resistance
15000 Ω
Transconductance
0.00085 S
Amplification factor
13
Max plate voltage
135 V
Max plate dissipation
0.4 W
Max cathode current
3 mA

Lorenz DC41W directly heated oxide-cathode driver triode (Treiberröhre), not a diode-triode. Maximum plate voltage 135 V, plate dissipation 0.4 W and cathode current 3 mA. Published operating points include 120 V anode, -5 V grid, 2 mA anode current, or 90 V, -3.45 V, 1.5 mA. Typical amplification factor 13, gm 0.85 mA/V and plate resistance 15 kΩ; interelectrode capacitances specified.

Source-dependent data

Operating conditions by source

Each block preserves the test conditions and published values from one reference. Values from different sources are intentionally kept separate.

Data set 01

194X Wehrmacht Rohren

Published operating points and test conditions from this source.

SECTION 1

Triode

Characteristics

  • Heater voltage

    1.2 V

Other

  • Maximum anode voltage

    135 V

  • Maximum cathode current

    3 mA