Tube cross-reference
DAF96 alternatives, equivalents, and replacements
Review exact electrical variations and directional substitutions recorded for the DAF96 voltage radio detector converter. Compare core specifications and verify every restriction before using a replacement.
Exact variations of DAF96
These designations belong to the same electrical variation group. Their names may differ because of international standards, manufacturing tolerances, or materials, but they are recorded as electrically equivalent—not merely substitutes.
1AH5 Voltage Pentode or Tetrode (under 100V)
- Base
- TDJ
- Socket
- Not recorded
- Base pins
- 7
- Sections
- 2
- Heater voltage
- 1.4 V
- Heater current
- 0.025 A
Replacement tubes for DAF96
The following tubes are recorded as possible replacements for DAF96. This direction does not establish that DAF96 can replace them.
Voltage Pentode or Tetrode (under 100V)
The database records 1AH5 as a possible replacement forDAF96.
No special restrictions are recorded for this substitution.
| Specification | Original tube | Replacement |
|---|---|---|
| Tube type | Voltage Radio Detector Converter | Voltage Pentode or Tetrode (under 100V) |
| Construction | Diode-Pentode | Diode-Pentode |
| Base | B7G | TDJ |
| Socket | B7G | Not recorded |
| Base pins | 7 | 7 |
| Sections | 2 | 2 |
| Heater voltage | 1.4 V | 1.4 V |
| Heater current | 0.025 A | 0.025 A |
Where DAF96 can be used as the replacement
In these recorded relationships, DAF96 is the replacement tube. The listed original tubes are not automatically suitable as replacements for DAF96.
Voltage Pentode or Tetrode (with diode)
The database records DAF96 as a possible replacement for1AF5.
No special restrictions are recorded for this substitution.
| Specification | DAF96 replacement | Original tube |
|---|---|---|
| Tube type | Voltage Radio Detector Converter | Voltage Pentode or Tetrode (with diode) |
| Construction | Diode-Pentode | Diode-Pentode |
| Base | B7G | 6AU |
| Socket | B7G | B7G |
| Base pins | 7 | 7 |
| Sections | 2 | 2 |
| Heater voltage | 1.4 V | 1.4 V |
| Heater current | 0.025 A | 0.025 A |
Voltage Pentode or Tetrode (under 100V)
The database records DAF96 as a possible replacement for1AH5.
No special restrictions are recorded for this substitution.
| Specification | DAF96 replacement | Original tube |
|---|---|---|
| Tube type | Voltage Radio Detector Converter | Voltage Pentode or Tetrode (under 100V) |
| Construction | Diode-Pentode | Diode-Pentode |
| Base | B7G | TDJ |
| Socket | B7G | Not recorded |
| Base pins | 7 | 7 |
| Sections | 2 | 2 |
| Heater voltage | 1.4 V | 1.4 V |
| Heater current | 0.025 A | 0.025 A |
Verify before substituting
Matching a base or heater voltage is not enough to prove that two tubes are interchangeable. Check pin connections, heater current, maximum ratings, bias requirements, warm-up behavior, and the equipment manufacturer’s service documentation before making a substitution.
View the complete DAF96 specifications →