Skip to main content

Rectifier - Half Wave ·Rectifier

DA1575

Philips directly heated high-vacuum rectifier for moderate high-voltage DC supplies. Its 11 V filament supports approximately 800–1500 V RMS anode service and 50 mA mean rectified current.

Directly heatedCold cathodeCommon cathodeDissimilar
Sections
1
Base
-
Socket code
-
Base pins
-
Nominal heater
11 V / 6.5 A

Description

Philips DA1575 is a directly heated high-vacuum rectifier with a 11 V, 6.5 A filament. Published service covers 800–1500 V RMS anode voltage and 50 mA mean rectified current, with 75 W allowable anode dissipation.

General specifications

Tube and section characteristics

Properties common to every published source and operating point.

Heater and base

Base
-
Socket code
-
Base pins
-
Nominal heater voltage
11 V
Nominal heater current
6.5 A
Parallel heater voltage
-
Parallel heater current
-
Series capable
No

Terminal pinout

Electrical assignments shared by every tube using this base designation.

No verified pinout is recorded for this base designation.

Section ratings

1 physical section, each with unique specifications.

Section 1

Rectifier

X-ray radiationInterelectrode capacitances
Plate resistance
1200 Ω
Max plate dissipation
75 W
Rectifier nominal output current
50 mA

Published ratings and characteristics promoted where a locked-schema field is semantically applicable; additional values retained as parameters.

Source-dependent data

Operating conditions by source

Each block preserves the test conditions and published values from one reference. Values from different sources are intentionally kept separate.

Data set 01

1999 Philips 0-D

Published operating points and test conditions from this source.

SECTION 1

Rectifier

Characteristics

  • Saturation current

    300 mA

    Published datasheet value

  • Saturation voltage

    360 V

    Published datasheet value

  • Internal resistance

    1200 Ω

    Published datasheet value

Other

  • Anode dissipation

    - to 75 W

    Published datasheet value

  • RMS anode A.C. voltage range

    800 to 1500 V

    Published datasheet value

  • D.C. output voltage range

    800 to 1500 V

    Published datasheet value

  • Mean rectified D.C. current

    - to 50 mA

    Published datasheet value

  • Useful D.C. output power

    50 W

    Published datasheet value