Alternatives & variations Download PDF datasheet

DA10550

Philips directly heated high-vacuum rectifier for high-voltage DC supplies. Its 12.5 V filament supports approximately 4–12 kV RMS anode service and 55 mA mean rectified current.

Directly heatedCold cathodeCommon cathodeDissimilar

Sections: 1
Base: -
Socket code: -
Base pins: -
Nominal heater: 12.5 V / 6.3 A

Description

Philips DA10550 is a directly heated high-vacuum rectifier with a 12.5 V, 6.3 A filament. Published service covers 4000–12000 V RMS anode voltage and 55 mA mean rectified current, with 200 W allowable anode dissipation.

General specifications

Tube and section characteristics

Properties common to every published source and operating point.

Heater and base

Base: -
Socket code: -
Base pins: -
Nominal heater voltage: 12.5 V
Nominal heater current: 6.3 A
Parallel heater voltage: -
Parallel heater current: -
Series capable: No

Terminal pinout

Electrical assignments shared by every tube using this base designation.

No verified pinout is recorded for this base designation.

Section ratings

1 physical section, each with unique specifications.

Section 1

Rectifier

X-ray radiationInterelectrode capacitances

Plate resistance: 2000 Ω
Max plate dissipation: 200 W
Rectifier nominal output current: 55 mA

Published ratings and characteristics promoted where a locked-schema field is semantically applicable; additional values retained as parameters.

Source-dependent data

Operating conditions by source

Each block preserves the test conditions and published values from one reference. Values from different sources are intentionally kept separate.

Data set 01

1999 Philips 0-D

Published operating points and test conditions from this source.

SECTION 1

Rectifier

Characteristics

Saturation current
260 mA
Published datasheet value
Saturation voltage
500 V
Published datasheet value
Internal resistance
2000 Ω
Published datasheet value

Other

Anode dissipation
- to 200 W
Published datasheet value
Anode dissipation test value
300 W
Published test value
RMS anode A.C. voltage range
4000 to 12000 V
Published datasheet value
D.C. output voltage range
4000 to 12000 V
Published datasheet value
Mean rectified D.C. current
- to 55 mA
Published datasheet value
Useful D.C. output power
550 W
Published datasheet value