D2014

Rugged 8–9.6 GHz pulsed traveling-wave power amplifier with control grid, capable of approximately 1.8 kW peak output and about 33 dB gain.

Directly heatedCold cathodeCommon cathodeDissimilarSpecialized

Sections: 1
Base: -
Socket code: -
Base pins: -
Nominal heater: 6.3 V / 5.2 A

Description

Rugged 1-kilowatt pulsed traveling-wave amplifier, 8.0–9.6 GHz, with control grid.

General specifications

Tube and section characteristics

Properties common to every published source and operating point.

Heater and base

Base: -
Socket code: -
Base pins: -
Nominal heater voltage: 6.3 V
Nominal heater current: 5.2 A
Parallel heater voltage: -
Parallel heater current: -
Series capable: No

Terminal pinout

Electrical assignments shared by every tube using this base designation.

No verified pinout is recorded for this base designation.

Section ratings

1 physical section, each with unique specifications.

Section 1

TravelingWave

X-ray radiationInterelectrode capacitances

No fixed ratings are recorded for this section.

Applicable promoted fields mapped semantically from the printed ratings; device-specific electrical limits and operating conditions are preserved densely in TUBE_SECTION_PARAMETER.

Source-dependent data

Operating conditions by source

Each block preserves the test conditions and published values from one reference. Values from different sources are intentionally kept separate.

Data set 01

1962 ITT

Published operating points and test conditions from this source.

SECTION 1

TravelingWave

Characteristic

Frequency Range
8000 to 9600 MHz

Other

Control-Grid Capacitance
13 pF
Anode Voltage Maximum
12000 V
Shell Current Maximum
1.5 A
Collector Dissipation Maximum
18 W
RF Input Power Maximum
10 W
RF Output Power Maximum
10 W
Duty Cycle Maximum
0.005
Pulse Width Maximum
10 us
Cathode Current Maximum
3 A
Grid Voltage Negative Maximum
-300 V
Grid Voltage Positive Maximum
450 V
Grid Current Maximum
27 A
Typical Frequency
9000 MHz
Typical Power Output
1.8 kW
Gain Minimum
33 dB